Summary

Market Overview
The United States Automotive Connectors Market was valued at USD 1.36 billion in 2024 and is projected to reach USD 1.91 billion by 2030, growing at a CAGR of 5.8% during the forecast period. Market growth is driven by a combination of increasing electrification in vehicles and evolving regulatory standards. As electric and hybrid vehicle adoption accelerates, demand rises for high-performance connectors capable of managing complex power distribution and high-voltage systems. Automakers are shifting toward miniaturized, durable connector solutions that meet the design and efficiency needs of electric powertrains. Additionally, regulatory mandates supporting advanced driver assistance systems (ADAS) and future safety technologies are boosting the requirement for high-precision connectors. Industry players are also responding to market trends such as vehicle lightweighting and data-rich environments by developing plastic optical fiber (POF) and EMI-shielded solutions that support faster data transmission and withstand harsh conditions. This growing demand for intelligent, resilient, and efficient connectivity is redefining the role of connectors across all vehicle categories.
Key Market Drivers
Surge in Electric Vehicle (EV) Adoption and Electrification of Drivetrains
A key driver accelerating the growth of the U.S. automotive connectors market is the rapid adoption of electric vehicles and the broader electrification of drivetrains. According to Cox Automotive, nearly 300,000 EVs were sold in the U.S. during Q1 2025, representing an 11% year-over-year increase. As automakers respond to decarbonization mandates and emission regulations, both legacy and emerging brands are investing in BEVs, PHEVs, and HEVs. These vehicle platforms require a significantly greater number of connectors than internal combustion engine models, as they rely on extensive power management systems and battery integration. High-voltage connectors are essential components in safely distributing electricity between systems such as batteries, motors, inverters, and charging units. With the evolution of battery technology toward higher energy densities and faster charging capabilities, the technical requirements for connectors have become more demanding—emphasizing the need for high durability, electromagnetic shielding, thermal resistance, and increased current-carrying capacity.
Key Market Challenges
Increasing Complexity in Vehicle Electrical Architectures and Connector Design Limitations
The growing complexity of vehicle electrical and electronic (E/E) systems presents a major challenge for connector design. As modern vehicles incorporate a greater number of ECUs, sensors, actuators, and data modules—especially in electric and hybrid variants—the demand for compact, lightweight, and high-performance connectors has surged. Designing connectors that can manage these requirements while maintaining structural integrity and signal fidelity is an ongoing engineering challenge. Miniaturization efforts often conflict with the need for high voltage tolerance, thermal durability, and fast data transmission, creating technical bottlenecks. As architectures become more centralized and interconnected, existing connector materials and designs are being pushed to their limits, requiring innovative approaches to meet performance expectations without compromising safety or reliability.
Key Market Trends
Transition Toward High-Speed Data Transmission and Ethernet-Based Architectures
One of the defining trends in the U.S. automotive connectors market is the move toward high-speed data transmission and Ethernet-based architectures. As vehicles integrate more real-time communication functions—including ADAS, infotainment, V2X connectivity, and digital cockpit systems—the limitations of legacy protocols such as CAN and LIN are prompting a transition to faster alternatives. Automotive Ethernet and FlexRay are becoming increasingly popular for managing large volumes of data with low latency and high reliability. This shift places new demands on connectors, which must support gigabit-level transmission speeds, maintain signal integrity, and offer robust EMI protection. Ethernet-compatible connectors streamline complex wiring networks and provide a scalable foundation for next-generation vehicle communication systems.
Key Market Players
• Delphi Automotive
• Sumitomo Electric Industries Ltd.
• Molex Incorporated
• Yazaki Corporation
• Japan Aviation Electronics Industry, Ltd.
• JST Mfg. Co., Ltd.
• AVX Corporation
• Amphenol Corporation
• Hirose Electric Co., Ltd
• Foxconn Technology Group
Report Scope:
In this report, the United States Automotive Connectors Market has been segmented into the following categories, in addition to the industry trends which have also been detailed below:
• United States Automotive Connectors Market, By Vehicle Type:
o Passenger Cars
o Commercial Vehicles
o Electric & Hybrid Vehicles
• United States Automotive Connectors Market, By Connection Type:
o Wire to Wire Connection
o Board to Board Connection
o Wire to Board Connection
• United States Automotive Connectors Market, By System Type:
o Sealed Connector System
o Unsealed Connector System
• United States Automotive Connectors Market, By Application Type:
o Body Control and Interiors
o Fuel and Emission Control
o Safety and Security System
o Engine Control & Cooling System
• United States Automotive Connectors Market, By Region:
o South
o Midwest
o West
o Northeast
Competitive Landscape
Company Profiles: Detailed analysis of the major companies presents in the United States Automotive Connectors Market.
Available Customizations:
United States Automotive Connectors Market report with the given market data, TechSci Research offers customizations according to a company's specific needs. The following customization options are available for the report:
Company Information
• Detailed analysis and profiling of additional market players (up to five).

ページTOPに戻る

Table of Contents

1. Introduction
1.1. Product Overview
1.2. Key Highlights of the Report
1.3. Market Coverage
1.4. Market Segments Covered
1.5. Research Tenure Considered
2. Research Methodology
2.1. Methodology Landscape
2.2. Objective of the Study
2.3. Baseline Methodology
2.4. Formulation of the Scope
2.5. Assumptions and Limitations
2.6. Source of Research
2.7. Approach for the Market Study
2.8. Methodology Followed for Calculation of Market Size & Market Shares
2.9. Forecasting Methodology
3. Executive Summary
3.1. Overview of the Market
3.2. Overview of Key Market Segmentations
3.3. Overview of Key Market Players
3.4. Overview of Key Regions
3.5. Overview of Market Drivers, Challenges, and Trends
4. United States Automotive Connectors Market Outlook
4.1. Market Size & Forecast
4.1.1. By Value
4.2. Market Share & Forecast
4.2.1. By Vehicle Type Market Share Analysis (Passenger Cars, Commercial Vehicles)
4.2.2. By Connection Type Market Share Analysis (Wire to Wire Connection, Board to Board Connection, Wire to Board Connection)
4.2.3. By System Type Market Share Analysis (Sealed Connector System, Unsealed Connector System)
4.2.4. By Application Type Market Share Analysis (Body Control and Interiors, Fuel and Emission Control, Safety and Security System, Engine Control & Cooling System)
4.2.5. By Regional Market Share Analysis
4.2.6. By Top 5 Companies Market Share Analysis, Others (2024)
4.3. United States Automotive Connectors Market Mapping & Opportunity Assessment
4.3.1. By Vehicle Type Market Mapping & Opportunity Assessment
4.3.2. By Connection Type Market Mapping & Opportunity Assessment
4.3.3. By System Type Market Mapping & Opportunity Assessment
4.3.4. By Application Type Market Mapping & Opportunity Assessment
4.3.5. By Regional Market Mapping & Opportunity Assessment
5. United States Passenger Cars Market Outlook
5.1. Market Size & Forecast
5.1.1. By Value
5.2. Market Share & Forecast
5.2.1. By Connection Type Market Share Analysis
5.2.2. By System Type Market Share Analysis
5.2.3. By Application Type Market Share Analysis
6. United States Commercial Market Outlook
6.1. Market Size & Forecast
6.1.1. By Value
6.2. Market Share & Forecast
6.2.1. By Connection Type Market Share Analysis
6.2.2. By System Type Market Share Analysis
6.2.3. By Application Type Market Share Analysis
7. Market Dynamics
7.1. Drivers
7.2. Challenges
8. Market Trends & Developments
8.1. Merger & Acquisition (If Any)
8.2. Vehicle Type Launches (If Any)
8.3. Recent Developments
9. Disruptions: Conflicts, Pandemics and Trade Barriers
10. Porters Five Forces Analysis
10.1. Competition in the Industry
10.2. Potential of New Entrants
10.3. Power of Suppliers
10.4. Power of Customers
10.5. Threat of Substitute Product
11. Policy & Regulatory Landscape
12. United States Economic Profile
13. Competitive Landscape
13.1. Company Profiles
13.1.1. Delphi Automotive.
13.1.1.1. Business Overview
13.1.1.2. Company Snapshot
13.1.1.3. Product & Services
13.1.1.4. Financials (As Per Availability)
13.1.1.5. Key Market Focus & Geographical Presence
13.1.1.6. Recent Developments
13.1.1.7. Key Management Personnel
13.1.2. Sumitomo Electric Industries Ltd.
13.1.3. Molex Incorporated
13.1.4. Yazaki Corporation
13.1.5. Japan Aviation Electronics Industry, Ltd.
13.1.6. JST Mfg. Co., Ltd.
13.1.7. AVX Corporation
13.1.8. Amphenol Corporation
13.1.9. Hirose Electric Co.Ltd
13.1.10. Foxconn Technology Group.
14. Strategic Recommendations
14.1. Key Focus Areas
14.1.1. Target Vehicle Type
14.1.2. Target System Type
14.1.3. Target Region
15. About Us & Disclaimer