Summary

Market Overview
The Asia-Pacific Plastic Doors & Windows Market was valued at USD 19.13 billion in 2024 and is projected to reach USD 29.11 billion by 2030, growing at a CAGR of 7.09% during the forecast period. The market is witnessing strong growth, driven by rapid urbanization, expanding infrastructure, and increasing demand for affordable, energy-efficient construction materials. Plastic fenestration products, particularly those made from uPVC and PVC, are gaining widespread acceptance in both residential and commercial segments due to their superior insulation, low maintenance, and resistance to harsh weather conditions. Countries such as China, India, Japan, South Korea, and several ASEAN nations are undergoing significant development in housing and institutional construction, spurring demand for plastic doors and windows. Environmental regulations promoting energy-saving materials, like India's ECBC and China's green certifications, further bolster adoption. Additionally, a growing middle class and home renovation activity are supporting the replacement of traditional materials with plastic-based alternatives across the region.
Key Market Drivers
Rapid Urbanization and Infrastructure Development
The Asia-Pacific region is experiencing significant urban growth, with millions relocating to urban areas annually. This shift is driving robust demand for new residential and commercial infrastructure. In response, developers are increasingly adopting materials that are cost-effective, durable, and easy to install—making plastic doors and windows a preferred choice. These products offer flexibility in design, reduced construction timelines, and lower overall costs. With projections indicating over 40% growth in urban housing projects across major Asia-Pacific cities by 2030, plastic fenestration is set to benefit significantly from the expanding construction landscape.
Key Market Challenges
Environmental Concerns Over Plastic Waste
Environmental sustainability is a growing concern that poses a key challenge for the Asia-Pacific plastic doors and windows market. Although plastic materials like uPVC provide practical benefits, they also contribute to global plastic waste accumulation. Rising regulatory pressure and consumer awareness around sustainability are prompting stricter controls on plastic use and disposal. Several countries in the region are implementing bans and restrictions on non-recyclable plastics, and these policies are expected to extend to construction-related applications. As a result, manufacturers are under increasing pressure to innovate and introduce recyclable or bio-based plastic alternatives to align with green building requirements and mitigate the risk of regulatory non-compliance.
Key Market Trends
Urbanization Fueling Demand for Cost-Effective Construction Materials
The ongoing urban expansion across Asia-Pacific is fueling the need for economical and scalable building materials. Forecasts suggest that over 2.5 billion people will reside in the region’s urban centers by 2050, intensifying demand for efficient construction solutions. Plastic doors and windows, known for their affordability, low upkeep, and resistance to environmental wear, are emerging as ideal choices for high-density developments such as apartment complexes and public housing. Government-led affordable housing initiatives in nations like India and Indonesia are accelerating the use of plastic fenestration, particularly in low- and middle-income segments, further driving market growth.
Key Market Players
• VEKA AG
• Deceuninck NV
• REHAU Group
• Profine Group
• Andersen Corporation
• Pella Corporation
• JELD-WEN Holding, Inc.
• Milgard Manufacturing, Inc.
• LIXIL Group Corporation
• DCM Shriram Ltd.
Report Scope:
In this report, the Asia-Pacific Plastic Doors & Windows Market has been segmented into the following categories, in addition to the industry trends which have also been detailed below:
• Asia-Pacific Plastic Doors & Windows Market, By Product Type:
o Plastic Doors
o Plastic Windows
• Asia-Pacific Plastic Doors & Windows Market, By Material Type:
o uPVC
o PVC
o Fiberglass
o Composite
o Others
• Asia-Pacific Plastic Doors & Windows Market, By Application:
o Residential
o Commercial
o Industrial
• Asia-Pacific Plastic Doors & Windows Market, By End User:
o New Construction
o Renovation & Replacement
• Asia-Pacific Plastic Doors & Windows Market, By Country:
o China
o Japan
o India
o South Korea
o Australia
o Singapore
o Thailand
o Malaysia
Competitive Landscape
Company Profiles: Detailed analysis of the major companies present in the Asia-Pacific Plastic Doors & Windows Market.
Available Customizations:
Asia-Pacific Plastic Doors & Windows Market report with the given market data, TechSci Research offers customizations according to a company's specific needs. The following customization options are available for the report:
Company Information
• Detailed analysis and profiling of additional market players (up to five).

ページTOPに戻る

Table of Contents

1. Product Overview
1.1. Market Definition
1.2. Scope of the Market
1.2.1. Markets Covered
1.2.2. Years Considered for Study
1.2.3. Key Market Segmentations
2. Research Methodology
2.1. Objective of the Study
2.2. Baseline Methodology
2.3. Key Industry Partners
2.4. Major Association and Secondary Sources
2.5. Forecasting Methodology
2.6. Data Triangulation & Validation
2.7. Assumptions and Limitations
3. Executive Summary
3.1. Overview of the Market
3.2. Overview of Key Market Segmentations
3.3. Overview of Key Market Players
3.4. Overview of Key Regions/Countries
3.5. Overview of Market Drivers, Challenges, and Trends
4. Voice of Customer
5. Asia-Pacific Plastic Doors & Windows Market Outlook
5.1. Market Size & Forecast
5.1.1. By Value
5.2. Market Share & Forecast
5.2.1. By Product Type (Plastic Doors, Plastic Windows)
5.2.2. By Material Type (uPVC, PVC, Fiberglass, Composite, Others)
5.2.3. By Application (Residential, Commercial, Industrial)
5.2.4. By End User (New Construction, Renovation & Replacement)
5.2.5. By Country (China, Japan, India, South Korea, Australia, Singapore, Thailand, Malaysia, Rest of Asia-Pacific)
5.3. By Company (2024)
5.4. Market Map
6. China Plastic Doors & Windows Market Outlook
6.1. Market Size & Forecast
6.1.1. By Value
6.2. Market Share & Forecast
6.2.1. By Product Type
6.2.2. By Material Type
6.2.3. By Application
6.2.4. By End User
7. Japan Plastic Doors & Windows Market Outlook
7.1. Market Size & Forecast
7.1.1. By Value
7.2. Market Share & Forecast
7.2.1. By Product Type
7.2.2. By Material Type
7.2.3. By Application
7.2.4. By End User
8. India Plastic Doors & Windows Market Outlook
8.1. Market Size & Forecast
8.1.1. By Value
8.2. Market Share & Forecast
8.2.1. By Product Type
8.2.2. By Material Type
8.2.3. By Application
8.2.4. By End User
9. South Korea Plastic Doors & Windows Market Outlook
9.1. Market Size & Forecast
9.1.1. By Value
9.2. Market Share & Forecast
9.2.1. By Product Type
9.2.2. By Material Type
9.2.3. By Application
9.2.4. By End User
10. Australia Plastic Doors & Windows Market Outlook
10.1. Market Size & Forecast
10.1.1. By Value
10.2. Market Share & Forecast
10.2.1. By Product Type
10.2.2. By Material Type
10.2.3. By Application
10.2.4. By End User
11. Singapore Plastic Doors & Windows Market Outlook
11.1. Market Size & Forecast
11.1.1. By Value
11.2. Market Share & Forecast
11.2.1. By Product Type
11.2.2. By Material Type
11.2.3. By Application
11.2.4. By End User
12. Thailand Plastic Doors & Windows Market Outlook
12.1. Market Size & Forecast
12.1.1. By Value
12.2. Market Share & Forecast
12.2.1. By Product Type
12.2.2. By Material Type
12.2.3. By Application
12.2.4. By End User
13. Malaysia Plastic Doors & Windows Market Outlook
13.1. Market Size & Forecast
13.1.1. By Value
13.2. Market Share & Forecast
13.2.1. By Product Type
13.2.2. By Material Type
13.2.3. By Application
13.2.4. By End User
14. Market Dynamics
14.1. Drivers
14.2. Challenges
15. Market Trends and Developments
15.1. Merger & Acquisition (If Any)
15.2. Product Launches (If Any)
15.3. Recent Developments
16. Company Profiles
16.1. VEKA AG
16.1.1. Business Overview
16.1.2. Key Revenue and Financials
16.1.3. Recent Developments
16.1.4. Key Personnel
16.1.5. Key Product/Services Offered
16.2. Deceuninck NV
16.3. REHAU Group
16.4. Profine Group
16.5. Andersen Corporation
16.6. Pella Corporation
16.7. JELD-WEN Holding, Inc.
16.8. Milgard Manufacturing, Inc.
16.9. LIXIL Group Corporation
16.10. DCM Shriram Ltd.
17. Strategic Recommendations
18. About Us & Disclaimer