詳細検索

詳細検索

お問い合わせ

農業機械 - 市場シェア分析、業界動向・統計、成長予測(2027年~2032年)

農業機械 - 市場シェア分析、業界動向・統計、成長予測(2027年~2032年)


Agricultural Machinery - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2027 - 2032)

農業機械市場の分析 Mordor Intelligenceによると、農業機械市場の規模は、2026年の1,930億米ドルから2027年には2,060億米ドルへと拡大し、2027年から2032年にかけて年平均成長率(CAGR)6.38%のCAGRで成長し... もっと見る

 

 

出版社
Mordor Intelligence
モードーインテリジェンス
出版年月
2026年10月22日
電子版価格
US$4,750
シングルユーザーライセンス
ライセンス・価格情報/注文方法はこちら
納期
3営業日以内
ページ数
120
言語
英語

英語原文をAIを使って翻訳しています。


 

サマリー

農業機械市場の分析

Mordor Intelligenceによると、農業機械市場の規模は、2026年の1,930億米ドルから2027年には2,060億米ドルへと拡大し、2027年から2032年にかけて年平均成長率(CAGR)6.38%のCAGRで成長し、2032年までに2,806億米ドルに達すると予測されています。本レポートは、タイプ(トラクター、収穫機など)、自動化レベル(手動、半自動など)、地域(アジア太平洋、北米など)ごとに分類されています。 市場予測は、入手可能なデータに基づき、金額(米ドル)で提示されています。

世界の農業機械市場の動向と分析

農業労働力の不足と賃金上昇

時間当たりの人件費が高騰する中、より少ない有償労働時間で農作業を遂行できる機械の導入がますます重要になっている。2025年4月、米国の農業経営者は、アラスカ州および農業サービス従事者を除き、直接雇用した労働者に1時間当たり平均19.52米ドルの名目総賃金を支払っており、これは2024年4月と比較して3%の増加となった。 直接雇用では、農場の雇用主がこの特定の賃金圧力にさらされる側となる。一方、オーナー自らが行う圃場作業の場合は、オーナーの労働時間を機械で代替しても、それに見合う直接的な人件費の削減にはつながらないため、販売上の訴求点が異なる。したがって、サプライヤーは、機械化が可能な雇用労働を対象に省力化機械を提案し、その機械で代替可能な有償労働を抱える雇用主に対して、賃金削減を主軸とした提案に焦点を絞ることができる。

精密農業とテレマティクスの統合

コネクテッド機器の普及により、機械とその稼働を管理するためのツールとの連携に対する需要が生まれています。 2026年にスペイン、フィンランド、イタリアを中心に実施された欧州の調査では、有効回答となった農林業のエンドユーザーの66.4%が、コネクテッドデジタルツールを毎日使用していると回答した。この利用頻度の高さから、統合は単なる時折の機器アップグレードにとどまらず、日常的な運用においても重要な要素となっている。 AGCO Corporationの報告によると、2025年にハードウェアを搭載して販売された同社の機械の88.4%にコネクティビティ機能を備えた資産が含まれていたが、当初の「完全コネクテッドな機械群」という目標は達成できなかった。こうした日常的なユーザーにとって、ツールとデータをやり取りできる機械は、コネクティビティ機能のない代替品にはない購入の決め手となるため、機器を買い替える際には、この統合が商業的に重要な要素となる。

高額な初期費用と資金調達の負担

機械の購入にあたっては、その取得原価を回収するとともに、設備の稼働にかかる費用も賄わなければならない。2025年のイリノイ州中部にある高生産性の穀物農場では、減価償却費は1エーカーあたり平均91米ドルであり、これはトウモロコシ栽培にかかる機械関連費用170米ドルの53%を占めていた。 これらの機械関連費用には、修理費、燃料・潤滑油代、および機械のレンタル料も含まれていた。したがって、この例では、減価償却費が他の機械費用項目の合計額を上回った。その結果、購入決定には、運営費の削減だけでは解消できない資本回収の負担が伴うことになる。

詳細レポートで分析されているその他の推進要因および制約要因には、以下のものが含まれます:

  1. 補助金および機械化向け融資支援
  2. 農場の統合と1エーカーあたりの生産量への圧力
  3. 断片化された農業構造と不均一な投資回収

推進要因および抑制要因の完全な一覧については、目次をご確認ください。

セグメント分析

2026年の農業機械市場規模のうち、トラクターが35.72%を占めた。 インド自動車販売店協会連盟(FADA)の記録によると、2025暦年のインドにおけるトラクターの小売登録台数は996,633台で、テランガーナ州を除く2024年の893,706台から11.52%増加した。 2026会計年度の業界販売実績については、マヒンドラ・アンド・マヒンドラ・リミテッドが、インドのトラクター業界の販売台数を1,160,231台と報告しており、前年比23.5%増となった。 マヒンドラ社は、この成長の要因として、好調なモンスーン、十分な貯水池の水位、トラクターに対するインドの物品・サービス税(GST)の引き下げ、およびGSTに関連する農村部の所得効果の拡大を挙げた。報告されたこうした作況や税制の状況により、農業所得と財政政策は、この大規模なトラクター購入者層への対応において中心的な役割を果たしている。

収穫用機械は、2027年から2032年にかけて年平均成長率(CAGR)7.7%を記録し、最も急速に成長するセグメントになると予測されています。 2026年上半期、フィリピン収穫後開発・機械化センター(PhilMech)は、フィリピンの「2025年米競争力強化基金」の配分枠に基づき、700台の稲作コンバインを納入した。 この大規模な機械の導入は、農民協同組合、協会、地方自治体にとって恩恵となり、機器へのアクセスを体系的に確保する手段を提供した。 一方、米国機器製造業者協会(AEM)の報告によると、2026年1月から9月にかけての米国における自走式コンバインの小売販売台数は、前年同期の2,683台から9.4%減の2,432台となった。 したがって、組織化された受益者への公的プログラムによる納入は、米国の小売事業とは別の明確な農業機械入手経路を提供しており、同小売事業の暫定販売台数の減少は、短期的な収穫見通しを左右する要因となっている。

報告書の対象範囲(全容):

  • 種類別
    • トラクター
      • 馬力別
        • 40 HP未満
        • 40 HP ~ 99 HP
        • 100 HP以上
      • トラクターの種類別
        • コンパクトユーティリティトラクター
        • ユーティリティトラクター
        • 畑作物トラクター
        • 果樹園とブドウ畑トラクター
    • 土壌整備・耕作機械
      • 除雪機
      • ハローズ
      • 耕運機およびティラー
    • 植栽・播種用機械
      • 播種機
      • プランター
      • 散布機
      • 移植機
    • 収穫用機械
      • コンバインハーベスターと脱穀機
      • 飼料収穫機
      • 特産作物用収穫機
    • 散布・作物保護用機械
      • 自走式散布機
      • 牽引式および搭載式散布機
      • 航空散布およびドローンを活用した散布システム
    • 干し草・飼料用機械
      • 芝刈り・コンディショナー
      • 手押し車
      • 熊手と草かき
    • 灌漑機械
      • スプリンクラー灌漑
      • 点滴灌漑
      • 機械式ピボットシステム
  • 自動化レベル別
    • マニュアル
    • 半自動
    • 自動
  • 地域別
    • 北米
      • アメリカ合衆国
      • カナダ
      • メキシコ
      • 残りの北米
    • 南アメリカ
      • ブラジル
      • アルゼンチン
      • 残りの南アメリカ
    • ヨーロッパ
      • ドイツ
      • フランス
      • イギリス
      • イタリア
      • ロシア
      • 残りのヨーロッパ
    • アジア太平洋地域
      • 中国
      • インド
      • 日本
      • オーストラリア
      • 残りのアジア太平洋地域
    • 中東
      • サウジアラビア
      • アラブ首長国連邦
      • トルコ
      • 残りの中東
    • アフリカ
      • 南アフリカ
      • ナイジェリア
      • 残りのアフリカ

地理分析

アジア太平洋地域 accounted for a 36.94% share of the agricultural machinery market size in 2026. インド's tractor industry reported 130,551 total sales, including exports, in September 2026, showing substantial commercial scale within one of the region's producer bases. First Tractor Company Limited, citing the National Bureau of Statistics, reported 465,200 tractors produced by 中国's manufacturers above a certain scale in 2025, down 4.9% year over year. アジア太平洋地域's share leadership is therefore supported by the scale of national tractor industries even when output in a major producer country contracts.

北米 is forecast to be the fastest-growing region, with a 7.1% CAGR over 2027-2032. By January 15, 2026, Bad Boy Mowers had produced its first tractor at its Monroeville, Alabama, facility. メキシコ recorded 14,500 tractor sales in 2025, up 3.6% from 2024, establishing a growing annual sales base within the region. Meanwhile, the Association of Equipment Manufacturers reported September 2026 tractor sales down 16.4% year over year in the アメリカ合衆国 and 15.1% in カナダ. The forecast expansion can draw on an additional assembly route and Mexican buyer activity, although weaker U.S. and Canadian tractor sales make the demand picture uneven.

CLIMMAR's 13-country ヨーロッパan series, including Switzerland, recorded 96,323 new tractor registrations in 2025 against 104,395 in 2024, down about 8%, narrowing dealer opportunities (all powers in Austria and イタリア, 50 hp minimum elsewhere). In 南アメリカ, Uruguay's Rivera government offers machinery services to small producers with up to 10 hectares for conventional tillage or 20 hectares for direct seeding, with March and July registration. In the 中東, Oman's agriculture ministry offers mechanization contributions of up to 50% of original equipment value, or 75% for social security families, subject to Omani nationality, document review, site inspection and approval. AGRA's 2025 report identified high capital costs, limited finance, weak repair services and inadequate infrastructure limiting mechanization viability in much of Central アフリカ, with small fragmented holdings making large-machine adoption inefficient. These Uruguayan machinery services and Omani contributions make program eligibility central to equipment access, alongside buyers' ability to fund individual purchases.

本レポートで取り上げている企業のリスト:

  1. ディア・アンド・カンパニー
  2. CNH Industrial N.V.
  3. AGCOコーポレーション
  4. クボタ株式会社
  5. マヒンドラ・アンド・マヒンドラ・リミテッド
  6. CLAAS KGaA mbH
  7. SDF S.p.A.
  8. ヤンマー・ホールディングス株式会社
  9. 株式会社伊勢崎
  10. Argo トラクター S.p.A.
  11. ブッハー・インダストリーズAG
  12. ヴァルモント・インダストリーズ社
  13. リンジー・コーポレーション
  14. トラクター アンド・ファーム・イクイップメント・リミテッド
  15. マスキオ・ガスパルド S.p.A.

その他の特典:

  • Excel形式の市場予測(ME)シート
  • 3か月間のアナリストによるサポート


お問い合わせ

お問合せ種類/内容 *

補足が有ればご記入ください
貴社名*
ご担当者名 * 姓 名
メールアドレス *

ページTOPに戻る


目次

1 はじめに
1.1 本調査の前提および市場の定義
1.2 本調査の範囲

2 調査方法

3 エグゼクティブ・サマリー

4 市場概況
4.1 市場の概要
4.2 市場の推進要因
4.2.1 農業労働力の不足と賃金上昇
4.2.2 精密農業とテレマティクスの統合
4.2.3 補助金および機械化向け融資支援
4.2.4 農場の統合と1エーカーあたりの生産性向上への圧力
4.2.5 請負作業の活用と「サービスとしての機器(EaaS)」の拡大
4.2.6 再生型および低排出型機器への資金調達
4.3 市場の制約要因
4.3.1 高い初期費用と資金調達の圧力
4.3.2 細分化された農業構造と不均一な投資回収
4.3.3 自律型圃場作業に関する規制上の不確実性
4.3.4 データの所有権、修理へのアクセス、相互運用性に関する摩擦
4.4 業界バリューチェーン分析
4.5 規制環境
4.6 技術的展望
4.7 ポーターの5つの力分析
4.7.1 新規参入の脅威
4.7.2 供給者の交渉力
4.7.3 購入者の交渉力
4.7.4 代替品の脅威
4.7.5 競合他社間の競争

5 市場規模および成長予測(金額ベース)
5.1 種類別
5.1.1 トラクター
5.1.1.1 馬力別
5.1.1.1.1 40 HP未満
5.1.1.1.2 40 HP~99 HP
5.1.1.1.3 100 HP以上
5.1.1.2 トラクターの種類別
5.1.1.2.1 コンパクトユーティリティトラクター
5.1.1.2.2 汎用トラクター
5.1.1.2.3 列作トラクター
5.1.1.2.4 果樹園・ブドウ園用トラクター
5.1.2 整地・耕作機械
5.1.2.1 プラウ
5.1.2.2 ハロー
5.1.2.3 カルチベーターおよびティラー
5.1.3 植え付け・播種機械
5.1.3.1 シードドリル
5.1.3.2 プランター
5.1.3.3 散布機
5.1.3.4 移植機
5.1.4 収穫機
5.1.4.1 コンバインおよび脱穀機
5.1.4.2 飼料用収穫機
5.1.4.3 特殊作物用収穫機
5.1.5 散布および作物保護用機械
5.1.5.1 自走式散布機
5.1.5.2 牽引式および搭載式散布機
5.1.5.3 航空散布およびドローン活用散布システム
5.1.6 干し草・飼料用機械
5.1.6.1 刈り取り・調整機
5.1.6.2 ベーラー
5.1.6.3 レーキおよびテッダー
5.1.7 灌漑機械
5.1.7.1 スプリンクラー灌漑
5.1.7.2 点滴灌漑
5.1.7.3 機械式ピボットシステム
5.2 自動化レベル別
5.2.1 手動
5.2.2 半自動
5.2.3 自動
5.3 地域別
5.3.1 北米
5.3.1.1 米国
5.3.1.2 カナダ
5.3.1.3 メキシコ
5.3.1.4 北米その他
5.3.2 南米
5.3.2.1 ブラジル
5.3.2.2 アルゼンチン
5.3.2.3 南米その他
5.3.3 ヨーロッパ
5.3.3.1 ドイツ
5.3.3.2 フランス
5.3.3.3 イギリス
5.3.3.4 イタリア
5.3.3.5 ロシア
5.3.3.6 その他のヨーロッパ諸国
5.3.4 アジア太平洋地域
5.3.4.1 中国
5.3.4.2 インド
5.3.4.3 日本
5.3.4.4 オーストラリア
5.3.4.5 アジア太平洋のその他の地域
5.3.5 中東
5.3.5.1 サウジアラビア
5.3.5.2 アラブ首長国連邦
5.3.5.3 トルコ
5.3.5.4 中東のその他地域
5.3.6 アフリカ
5.3.6.1 南アフリカ
5.3.6.2 ナイジェリア
5.3.6.3 アフリカのその他地域

6 競争環境
6.1 市場集中度
6.2 戦略的動向
6.3 市場シェア分析
6.4 企業概要(グローバルレベルの概要、市場レベルの概要、主要セグメント、入手可能な財務情報、戦略情報、主要企業の市場順位・シェア、製品・サービス、および最近の動向を含む)
6.4.1 ディア・アンド・カンパニー
6.4.2 CNHインダストリアルN.V.
6.4.3 AGCOコーポレーション
6.4.4 クボタ株式会社
6.4.5 マヒンドラ・アンド・マヒンドラ・リミテッド
6.4.6 CLAAS KGaA mbH
6.4.7 SDF S.p.A.
6.4.8 ヤンマーホールディングス株式会社
6.4.9 井関農機株式会社
6.4.10 アルゴ・トラクターズ S.p.A.
6.4.11 ブッハー・インダストリーズ AG
6.4.12 ヴァルモント・インダストリーズ社
6.4.13 リンジー・コーポレーション
6.4.14 トラクターズ・アンド・ファーム・イクイップメント・リミテッド
6.4.15 マスキオ・ガスパルド S.p.A.

7 市場機会と将来展望
7.1 未開拓分野および未充足ニーズの評価

 

ページTOPに戻る


 

Summary

Agricultural Machinery Market Analysis

According to Mordor Intelligence, the agricultural machinery market size is expected to grow from USD 193 billion in 2026 to USD 206 billion in 2027 and is forecast to reach USD 280.6 billion by 2032 at 6.38% CAGR over 2027-2032. This report is segmented by Type (Tractors, Harvesting Machinery, and more), Automation Level (Manual, Semi-Automatic, and more), and Geography (Asia-Pacific, North America, and more). The market forecasts are provided in terms of value (USD), based on availability.

Global Agricultural Machinery Market Trends and Insights

Farm labor scarcity and wage inflation

Higher hourly labor costs strengthen the case for machinery that can perform a farm operation with fewer paid hours. U.S. farm operators paid directly hired workers an average nominal gross wage of USD 19.52 per hour in April 2025, up 3% from April 2024, excluding Alaska and agricultural service workers. Direct hiring makes the farm employer the buyer exposed to this particular wage pressure. Owner-operated fieldwork presents a different sales case because replacing the owner's time creates no equivalent direct payroll saving. Suppliers can therefore target labor-saving machinery at mechanizable hired tasks, concentrating the wage-based proposition on employers with paid work that equipment can replace.

Precision agriculture and telematics integration

Connected equipment creates demand for integration between the machine and the tools used to manage its work. In a 2026 European survey concentrated in Spain, Finland, and Italy, 66.4% of valid agricultural and forestry end-user respondents reported daily use of connected digital tools. That frequency makes integration relevant to ordinary operations, rather than only occasional equipment upgrades. AGCO Corporation reported that 88.4% of its machines sold with hardware in 2025 included connectivity-enabled assets, although it missed its initial fully connected fleet target. For these daily users, a machine that exchanges data with their tools offers a purchase argument that an unconnected alternative lacks, making integration commercially relevant when they replace equipment.

High upfront cost and financing pressure

A machinery purchase must recover its capital cost as well as cover the expense of running the equipment. On high-productivity central Illinois grain farms in 2025, depreciation averaged USD 91 per acre, representing 53% of USD 170 in machinery-related costs for growing corn. Those machinery-related costs also included repairs, fuel and oil, and machine hire. Depreciation therefore exceeded the combined total of the other machinery-cost categories in this example. The acquisition decision consequently carries a capital-recovery burden that reductions in running expenses alone cannot remove.

Other drivers and restraints analyzed in the detailed report include:

  1. Subsidies and mechanization credit support
  2. Farm consolidation and output-per-acre pressure
  3. Fragmented farm structures and uneven payback

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

Tractors accounted for a 35.72% share of the agricultural machinery market size in 2026. The Federation of Automobile Dealers Associations (FADA) recorded 996,633 tractor retail registrations in India in calendar 2025, up 11.52% from 893,706 in 2024, excluding Telangana. For the separate FY2026 industry-sales series, Mahindra & Mahindra Limited reported Indian tractor industry sales of 1,160,231 units, up 23.5% year over year. Mahindra attributed that growth to favorable monsoons, good reservoir levels, a cut in India's goods and services tax (GST) on tractors, and a broader GST-related rural income effect. Those reported crop and tax conditions make farm income and fiscal policy central to serving this substantial tractor buyer base.

Harvesting machinery is forecast to be the fastest-growing segment, with a 7.7% CAGR over 2027-2032. In the first half of 2026, the Philippine Center for Postharvest Development and Mechanization (PhilMech) delivered 700 rice combine harvesters under the Philippines' 2025 Rice Competitiveness Enhancement Fund allocation. The broader machinery rollout benefited farmers' cooperatives, associations, and local government units, providing an organized channel for equipment access. Meanwhile, the Association of Equipment Manufacturers (AEM) reported that preliminary U.S. retail sales of self-propelled combines fell 9.4% to 2,432 units in January-September 2026 from 2,683 a year earlier. Public-program deliveries to organized beneficiaries therefore provide a distinct equipment-access channel alongside the U.S. retail business, whose preliminary sales decline qualifies the near-term harvesting outlook.

Complete Report Scope:

  • By Type
    • Tractors
      • By Horsepower
        • Less than 40 HP
        • 40 HP to 99 HP
        • 100 HP and Above
      • By Tractor Type
        • Compact Utility Tractors
        • Utility Tractors
        • Row Crop Tractors
        • Orchard and Vineyard Tractors
    • Soil Preparation and Cultivation Machinery
      • Plows
      • Harrows
      • Cultivators and Tillers
    • Planting and Seeding Machinery
      • Seed Drills
      • Planters
      • Broadcast Spreaders
      • Transplanters
    • Harvesting Machinery
      • Combine Harvesters and Threshers
      • Forage Harvesters
      • Specialty Crop Harvesters
    • Spraying and Crop Protection Machinery
      • Self-Propelled Sprayers
      • Trailed and Mounted Sprayers
      • Aerial and Drone-Enabled Spraying Systems
    • Hay and Forage Machinery
      • Mower-Conditioners
      • Balers
      • Rakes and Tedders
    • Irrigation Machinery
      • Sprinkler Irrigation
      • Drip Irrigation
      • Mechanized Pivot Systems
  • By Automation Level
    • Manual
    • Semi-Automatic
    • Automatic
  • By Geography
    • North America
      • United States
      • Canada
      • Mexico
      • Rest of North America
    • South America
      • Brazil
      • Argentina
      • Rest of South America
    • Europe
      • Germany
      • France
      • United Kingdom
      • Italy
      • Russia
      • Rest of Europe
    • Asia-Pacific
      • China
      • India
      • Japan
      • Australia
      • Rest of Asia-Pacific
    • Middle East
      • Saudi Arabia
      • United Arab Emirates
      • Turkey
      • Rest of Middle East
    • Africa
      • South Africa
      • Nigeria
      • Rest of Africa

Geography Analysis

Asia-Pacific accounted for a 36.94% share of the agricultural machinery market size in 2026. India's tractor industry reported 130,551 total sales, including exports, in September 2026, showing substantial commercial scale within one of the region's producer bases. First Tractor Company Limited, citing the National Bureau of Statistics, reported 465,200 tractors produced by China's manufacturers above a certain scale in 2025, down 4.9% year over year. Asia-Pacific's share leadership is therefore supported by the scale of national tractor industries even when output in a major producer country contracts.

North America is forecast to be the fastest-growing region, with a 7.1% CAGR over 2027-2032. By January 15, 2026, Bad Boy Mowers had produced its first tractor at its Monroeville, Alabama, facility. Mexico recorded 14,500 tractor sales in 2025, up 3.6% from 2024, establishing a growing annual sales base within the region. Meanwhile, the Association of Equipment Manufacturers reported September 2026 tractor sales down 16.4% year over year in the United States and 15.1% in Canada. The forecast expansion can draw on an additional assembly route and Mexican buyer activity, although weaker U.S. and Canadian tractor sales make the demand picture uneven.

CLIMMAR's 13-country European series, including Switzerland, recorded 96,323 new tractor registrations in 2025 against 104,395 in 2024, down about 8%, narrowing dealer opportunities (all powers in Austria and Italy, 50 hp minimum elsewhere). In South America, Uruguay's Rivera government offers machinery services to small producers with up to 10 hectares for conventional tillage or 20 hectares for direct seeding, with March and July registration. In the Middle East, Oman's agriculture ministry offers mechanization contributions of up to 50% of original equipment value, or 75% for social security families, subject to Omani nationality, document review, site inspection and approval. AGRA's 2025 report identified high capital costs, limited finance, weak repair services and inadequate infrastructure limiting mechanization viability in much of Central Africa, with small fragmented holdings making large-machine adoption inefficient. These Uruguayan machinery services and Omani contributions make program eligibility central to equipment access, alongside buyers' ability to fund individual purchases.

List of Companies Covered in this Report:

  1. Deere & Company
  2. CNH Industrial N.V.
  3. AGCO Corporation
  4. Kubota Corporation
  5. Mahindra & Mahindra Limited
  6. CLAAS KGaA mbH
  7. SDF S.p.A.
  8. Yanmar Holdings Co., Ltd.
  9. Iseki & Co., Ltd.
  10. Argo Tractors S.p.A.
  11. Bucher Industries AG
  12. Valmont Industries, Inc.
  13. Lindsay Corporation
  14. Tractors and Farm Equipment Limited
  15. Maschio Gaspardo S.p.A.

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support


ページTOPに戻る


Table of Contents

1 INTRODUCTION
1.1 Study Assumptions and Market Definition
1.2 Scope of the Study

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET LANDSCAPE
4.1 Market Overview
4.2 Market Drivers
4.2.1 Farm labor scarcity and wage inflation
4.2.2 Precision agriculture and telematics integration
4.2.3 Subsidies and mechanization credit support
4.2.4 Farm consolidation and output-per-acre pressure
4.2.5 Custom hiring and equipment-as-a-service expansion
4.2.6 Regenerative and low-emission equipment funding
4.3 Market Restraints
4.3.1 High upfront cost and financing pressure
4.3.2 Fragmented farm structures and uneven payback
4.3.3 Autonomous field-operation regulatory uncertainty
4.3.4 Data ownership, repair access, and interoperability frictions
4.4 Industry Value Chain Analysis
4.5 Regulatory Landscape
4.6 Technological Outlook
4.7 Porter's Five Forces Analysis
4.7.1 Threat of New Entrants
4.7.2 Bargaining Power of Suppliers
4.7.3 Bargaining Power of Buyers
4.7.4 Threat of Substitutes
4.7.5 Competitive Rivalry

5 MARKET SIZE AND GROWTH FORECASTS (VALUE)
5.1 By Type
5.1.1 Tractors
5.1.1.1 By Horsepower
5.1.1.1.1 Less than 40 HP
5.1.1.1.2 40 HP to 99 HP
5.1.1.1.3 100 HP and Above
5.1.1.2 By Tractor Type
5.1.1.2.1 Compact Utility Tractors
5.1.1.2.2 Utility Tractors
5.1.1.2.3 Row Crop Tractors
5.1.1.2.4 Orchard and Vineyard Tractors
5.1.2 Soil Preparation and Cultivation Machinery
5.1.2.1 Plows
5.1.2.2 Harrows
5.1.2.3 Cultivators and Tillers
5.1.3 Planting and Seeding Machinery
5.1.3.1 Seed Drills
5.1.3.2 Planters
5.1.3.3 Broadcast Spreaders
5.1.3.4 Transplanters
5.1.4 Harvesting Machinery
5.1.4.1 Combine Harvesters and Threshers
5.1.4.2 Forage Harvesters
5.1.4.3 Specialty Crop Harvesters
5.1.5 Spraying and Crop Protection Machinery
5.1.5.1 Self-Propelled Sprayers
5.1.5.2 Trailed and Mounted Sprayers
5.1.5.3 Aerial and Drone-Enabled Spraying Systems
5.1.6 Hay and Forage Machinery
5.1.6.1 Mower-Conditioners
5.1.6.2 Balers
5.1.6.3 Rakes and Tedders
5.1.7 Irrigation Machinery
5.1.7.1 Sprinkler Irrigation
5.1.7.2 Drip Irrigation
5.1.7.3 Mechanized Pivot Systems
5.2 By Automation Level
5.2.1 Manual
5.2.2 Semi-Automatic
5.2.3 Automatic
5.3 By Geography
5.3.1 North America
5.3.1.1 United States
5.3.1.2 Canada
5.3.1.3 Mexico
5.3.1.4 Rest of North America
5.3.2 South America
5.3.2.1 Brazil
5.3.2.2 Argentina
5.3.2.3 Rest of South America
5.3.3 Europe
5.3.3.1 Germany
5.3.3.2 France
5.3.3.3 United Kingdom
5.3.3.4 Italy
5.3.3.5 Russia
5.3.3.6 Rest of Europe
5.3.4 Asia-Pacific
5.3.4.1 China
5.3.4.2 India
5.3.4.3 Japan
5.3.4.4 Australia
5.3.4.5 Rest of Asia-Pacific
5.3.5 Middle East
5.3.5.1 Saudi Arabia
5.3.5.2 United Arab Emirates
5.3.5.3 Turkey
5.3.5.4 Rest of Middle East
5.3.6 Africa
5.3.6.1 South Africa
5.3.6.2 Nigeria
5.3.6.3 Rest of Africa

6 COMPETITIVE LANDSCAPE
6.1 Market Concentration
6.2 Strategic Moves
6.3 Market Share Analysis
6.4 Company Profiles (includes Global level Overview, Market level overview, Core Segments, Financials as available, Strategic Information, Market Rank/Share for key companies, Products and Services, and Recent Developments)
6.4.1 Deere & Company
6.4.2 CNH Industrial N.V.
6.4.3 AGCO Corporation
6.4.4 Kubota Corporation
6.4.5 Mahindra & Mahindra Limited
6.4.6 CLAAS KGaA mbH
6.4.7 SDF S.p.A.
6.4.8 Yanmar Holdings Co., Ltd.
6.4.9 Iseki & Co., Ltd.
6.4.10 Argo Tractors S.p.A.
6.4.11 Bucher Industries AG
6.4.12 Valmont Industries, Inc.
6.4.13 Lindsay Corporation
6.4.14 Tractors and Farm Equipment Limited
6.4.15 Maschio Gaspardo S.p.A.

7 MARKET OPPORTUNITIES AND FUTURE OUTLOOK
7.1 White-Space and Unmet-Need Assessment

 

ページTOPに戻る

ご注文は、お電話またはWEBから承ります。お見積もりの作成もお気軽にご相談ください。

webからのご注文・お問合せはこちらのフォームから承ります


よくあるご質問


Mordor Intelligence社はどのような調査会社ですか?


Mordor Intelligenceは世界の多様な市場に関する重要動向、技術、競争、機会について調査しています。 もっと見る


調査レポートの納品までの日数はどの程度ですか?


在庫のあるものは速納となりますが、平均的には 3-4日と見て下さい。
但し、一部の調査レポートでは、発注を受けた段階で内容更新をして納品をする場合もあります。
発注をする前のお問合せをお願いします。


注文の手続きはどのようになっていますか?


1)お客様からの御問い合わせをいただきます。
2)見積書やサンプルの提示をいたします。
3)お客様指定、もしくは弊社の発注書をメール添付にて発送してください。
4)データリソース社からレポート発行元の調査会社へ納品手配します。
5) 調査会社からお客様へ納品されます。最近は、pdfにてのメール納品が大半です。


お支払方法の方法はどのようになっていますか?


納品と同時にデータリソース社よりお客様へ請求書(必要に応じて納品書も)を発送いたします。
お客様よりデータリソース社へ(通常は円払い)の御振り込みをお願いします。
請求書は、納品日の日付で発行しますので、翌月最終営業日までの当社指定口座への振込みをお願いします。振込み手数料は御社負担にてお願いします。
お客様の御支払い条件が60日以上の場合は御相談ください。
尚、初めてのお取引先や個人の場合、前払いをお願いすることもあります。ご了承のほど、お願いします。


データリソース社はどのような会社ですか?


当社は、世界各国の主要調査会社・レポート出版社と提携し、世界各国の市場調査レポートや技術動向レポートなどを日本国内の企業・公官庁及び教育研究機関に提供しております。
世界各国の「市場・技術・法規制などの」実情を調査・収集される時には、データリソース社にご相談ください。
お客様の御要望にあったデータや情報を抽出する為のレポート紹介や調査のアドバイスも致します。


詳細検索

このレポートへのお問合せ

03-3582-2531

電話お問合せもお気軽に

 

 

2026/11/18 10:26

160.63 円

176.84 円

214.73 円

ページTOPに戻る