Summary

This study defines Aluminum Die Casting Alloys as finished and semi-finished die-cast aluminum parts and assemblies, rather than upstream alloy ingots or generic cast ingots. The scope covers components produced by high-pressure die casting (HPDC), low-pressure die casting (LPDC) and gravity die casting (GDC), including machined and value-added parts integrated into modules across automotive, industrial, electrical & electronics, consumer, construction and other end-use sectors. On this basis, the global Aluminum Die Casting Alloys market is estimated at around USD 148.8 billion in 2024, up from approximately USD 87.9 billion in 2020, reflecting a strong post-pandemic rebound and the impact of higher aluminum and energy prices (2020–2024 value CAGR ~14.1%). Looking ahead, market value is projected to reach about USD 220.9 billion by 2031, implying a 2025–2031 CAGR of roughly 5.8%.
Over the full 2020–2031 period, our tonnage model points to mid-single-digit volume growth (around 5% CAGR), with value expansion gradually normalizing from price-driven to primarily volume- and mix-driven as input costs stabilize and product mix shifts toward higher value-added structural castings.
By alloy family, the market continues to be dominated by A383 (ADC12) and A380 as the workhorse die-casting grades, together accounting for just over half of global value in 2024 and remaining the backbone of the industry through 2031. In 2024, A383 represents roughly 30–31% of global value and A380 about 27%, with their combined share easing only modestly by 2031 as demand diversifies. A356 and “Other” structural and specialty alloys (including higher-ductility Al-Si-Mg families and advanced HPDC structural grades) exhibit the fastest growth, with high single-digit CAGRs between 2025 and 2031 as OEMs migrate more crash-relevant body structures, chassis parts and battery housings to die-cast aluminum. A360, A413 and B390 retain important but smaller niches in corrosion-resistant, thin-wall, high-wear and high-temperature components. Overall, the alloy mix evolves gradually: mainstream A3xx alloys continue to carry the majority of volume and value, while structural and specialty alloys expand their share from roughly one-fifth to approaching one-quarter of the market by 2031.
External benchmarks on die-casting alloy usage support this pattern, consistently identifying A380/ADC12-type alloys as the largest single family globally, with increasing adoption of higher-performance structural alloys for demanding automotive and industrial applications.
On the demand side, automotive and transportation remains the core of the Aluminum Die Casting Alloys market. Passenger vehicles—covering powertrain & drivetrain components, chassis, suspension & steering components, body, structural & safety components and interior, exterior & comfort systems—account for the majority of global demand. Commercial vehicles & buses, together with off-highway vehicles and transportation equipment, provide additional volume in engines, transmissions, axles and structural modules. Non-automotive sectors form a diversified second pillar of demand: industrial machinery & power tools, electrical & electronics (including telecommunications & ICT hardware), consumer durables & home appliances, building & construction hardware, energy & power (including renewables), aerospace & defense & marine, healthcare & medical equipment, and other uses such as furniture, lighting and sports & leisure. These segments generally grow more steadily but at somewhat lower rates than the fastest automotive sub-segments, providing a degree of resilience across economic cycles.
Regionally, the market is anchored by Asia, with China as the single largest producer and consumer of Aluminum Die Casting Alloys. China already accounts for close to half of global die-cast aluminum tonnage, supported by its scale in internal combustion engine (ICE) vehicles, rapid growth in new energy vehicles (NEVs), and extensive capacity in industrial, appliance and electronics castings. Earlier sections of this report show that China’s die-casting output has grown faster than the global average since 2019 and is expected to retain or slightly increase its share through 2031 as local die casters move up the value chain and NEV platforms proliferate. North America, Europe, Japan, India and South Korea form additional core clusters, each with distinct profiles in terms of product mix, technology depth and regulatory pressure.
External market studies on aluminum casting broadly corroborate this scale and growth trajectory, placing the global aluminum casting market in the USD 70–90 billion range in the early 2020s and projecting mid-single- to high-single-digit value CAGRs to 2031, with Asia–Pacific and automotive applications as the primary growth drivers.
Within this context, the forecast for Aluminum Die Casting Alloys is characterized by three overarching themes. First, the market remains structurally supported by lightweighting, electrification and thermal-management requirements in vehicles and equipment, which increase aluminum content per unit even as traditional ICE castings mature. Second, alloy and application mix shift toward more structural, safety-critical and thermally demanding parts, amplifying demand for higher-value alloys and advanced HPDC technologies (including vacuum die casting and megacasting) rather than merely adding tonnage. Third, cost, energy and ESG constraints cap pricing power and accelerate consolidation and technological upgrading among die casters: energy-intensive and sub-scale plants face rising pressure, while leading players invest in high-efficiency melting, automation, process control and low-carbon aluminum to remain competitive under tightening regulatory regimes.
Report Includes:
This report presents an overview of global market for Aluminum Die Casting Alloys, capacity, output, revenue and price. Analyses of the global market trends, with historic market revenue/sales data for 2020 - 2024, estimates for 2025, and projections of CAGR through 2031.
This report researches the key producers of Aluminum Die Casting Alloys, also provides the consumption of main regions and countries. Highlights of the upcoming market potential for Aluminum Die Casting Alloys, and key regions/countries of focus to forecast this market into various segments and sub-segments. Country specific data and market value analysis for the U.S., Canada, Mexico, Brazil, China, Japan, South Korea, Southeast Asia, India, Germany, the U.K., Italy, Middle East, Africa, and Other Countries.
This report focuses on the Aluminum Die Casting Alloys sales, revenue, market share and industry ranking of main manufacturers, data from 2020 to 2024. Identification of the major stakeholders in the global Aluminum Die Casting Alloys market, and analysis of their competitive landscape and market positioning based on recent developments and segmental revenues. This report will help stakeholders to understand the competitive landscape and gain more insights and position their businesses and market strategies in a better way.
This report analyzes the segments data by Type and by Application, sales, revenue, and price, from 2020 to 2031. Evaluation and forecast the market size for Aluminum Die Casting Alloys sales, projected growth trends, production technology, application and end-user industry.
Descriptive company profiles of the major global players, including Nemak, Ryobi, Ahresty, IKD, Wencan Group, Georg Fischer, Guangdong Hongtu, Xusheng, and Millison Technologies, etc.
Market Segmentation
By Company
 Nemak
 Ryobi
 CITIC Dicastal
 Ahresty
 Martinrea
 IKD
 Wencan Group
 Guangdong Hongtu
 Handtmann
 Aludyne
 Pace Industries
 Endurance
 Chongqing Millison
 Rockman Industries
 Georg Fischer
 Rheinmetall
 Gnutti Carlo
 LTH
 Jiangsu Rongtai
 Nanjing Chervon
 Teksid
 Ningbo Xusheng
 DGS
 Hongte Technology
 Gibbs
 Foryou
 Form Technologies
 Suzhou Yadelin
 Ningbo Spey
 Sandhar
 Eontec
 MK Tron
 Tatfook

Segment by Type
 A383
 A356
 A380
 A360
 A413
 B390
 Other

Segment by Application
 Passenger Vehicles – Powertrain & Drivetrain Components
 Passenger Vehicles – Chassis, Suspension & Steering Components
 Passenger Vehicles – Body, Structural & Safety Components
 Passenger Vehicles – Interior, Exterior & Comfort Systems
 Commercial Vehicles & Buses
 Off-highway Vehicles & Transportation Equipment
 Industrial Machinery & Power Tools
 Electrical & Electronics
 Consumer Durables & Home Appliances
 Building & Construction Hardware
 Energy & Power
 Aerospace & Defense & Marine
 Healthcare & Medical Equipment
 Others

Production by Region
 China
 United States
 Japan
 India
 Germany
 Italy
 South Korea
 Other

Sales by Region
US & Canada
 U.S.
 Canada
China
Asia (excluding China)
 Japan
 South Korea
 China Taiwan
 Southeast Asia
 India
Europe
 Germany
 France
 U.K.
 Italy
 Russia
Middle East, Africa, Latin America
 Brazil
 Mexico
 Turkey
 Israel
 GCC Countries


Chapter Outline
Chapter 1: Introduces the report scope of the report, executive summary of different market segments (by Type and by Application, etc), including the market size of each market segment, future development potential, and so on. It offers a high-level view of the current state of the market and its likely evolution in the short to mid-term, and long term.
Chapter 2: Aluminum Die Casting Alloys production/output of global and key producers (regions/countries). It provides a quantitative analysis of the production, and development potential of each producer in the next six years.
Chapter 3: Sales (consumption), revenue of Aluminum Die Casting Alloys in global, regional level and country level. It provides a quantitative analysis of the market size and development potential of each region and its main countries and introduces the market development, future development prospects, market space of each country in the world.
Chapter 4: Detailed analysis of Aluminum Die Casting Alloys manufacturers competitive landscape, price, sales, revenue, market share and industry ranking, latest development plan, merger, and acquisition information, etc.
Chapter 5: Provides the analysis of various market segments by Type, covering the sales, revenue, average price, and development potential of each market segment, to help readers find the blue ocean market in different market segments.
Chapter 6: Provides the analysis of various market segments by Application, covering the sales, revenue, average price, and development potential of each market segment, to help readers find the blue ocean market in different downstream markets.
Chapter 7: North America (US & Canada) by Type, by Application and by country, sales, and revenue for each segment.
Chapter 8: Europe by Type, by Application and by country, sales, and revenue for each segment.
Chapter 9: China by Type, and by Application, sales, and revenue for each segment.
Chapter 10: Asia (excluding China) by Type, by Application and by region, sales, and revenue for each segment.
Chapter 11: Middle East, Africa, Latin America by Type, by Application and by country, sales, and revenue for each segment.
Chapter 12: Provides profiles of key manufacturers, introducing the basic situation of the main companies in the market in detail, including product descriptions and specifications, Aluminum Die Casting Alloys sales, revenue, price, gross margin, and recent development, etc.
Chapter 13: Analysis of industrial chain, sales channel, key raw materials, distributors and customers.
Chapter 14: Introduces the market dynamics, latest developments of the market, the driving factors and restrictive factors of the market, the challenges and risks faced by manufacturers in the industry, and the analysis of relevant policies in the industry.
Chapter 15: The main points and conclusions of the report.

ページTOPに戻る

Table of Contents

1 STUDY COVERAGE 1
1.1 Aluminum Die Casting Alloys Product Introduction 1
1.2 Market by Type 3
1.2.1 Global Aluminum Die Casting Alloys Market Size by Type, 2020 VS 2024 VS 2031 3
1.2.2 A380 4
1.2.3 A383 5
1.2.4 A356 6
1.2.5 A360 7
1.2.6 A413 9
1.2.7 B390 10
1.2.8 Other 11
1.3 Market by Application 12
1.3.1 Global Aluminum Die Casting Alloys Market Size by Application, 2020 VS 2024 VS 2031 12
1.3.2 Passenger Vehicles – Powertrain & Drivetrain Components 14
1.3.3 Passenger Vehicles – Chassis, Suspension & Steering Components 15
1.3.4 Passenger Vehicles – Body, Structural & Safety Components 15
1.3.5 Passenger Vehicles – Interior, Exterior & Comfort Systems 16
1.3.6 Commercial Vehicles & Buses 17
1.3.7 Off-highway Vehicles & Transportation Equipment 18
1.3.8 Industrial Machinery & Power Tools 19
1.3.9 Electrical & Electronics 20
1.3.10 Consumer Durables & Home Appliances 20
1.3.11 Building & Construction Hardware 21
1.3.12 Energy & Power 22
1.3.13 Aerospace & Defense & Marine 23
1.3.14 Healthcare & Medical Equipment 23
1.3.15 Others 24
1.4 Assumptions and Limitations 25
1.5 Study Objectives 26
1.6 Years Considered 27
2 GLOBAL ALUMINUM DIE CASTING ALLOYS PRODUCTION 28
2.1 Global Aluminum Die Casting Alloys Production Capacity (2020-2031) 28
2.2 Global Aluminum Die Casting Alloys Production by Region: 2020 VS 2024 VS 2031 28
2.3 Global Aluminum Die Casting Alloys Production by Region 30
2.3.1 Global Aluminum Die Casting Alloys Historic Production by Region (2020-2025) 30
2.3.2 Global Aluminum Die Casting Alloys Forecasted Production by Region (2026-2031) 31
2.3.3 Global Aluminum Die Casting Alloys Production Market Share by Region (2020-2031) 31
2.4 China 33
2.5 United States 33
2.6 Japan 34
2.7 India 35
2.8 Germany 35
2.9 Italy 36
2.10 South Korea 37
3 EXECUTIVE SUMMARY 38
3.1 Global Aluminum Die Casting Alloys Revenue Estimates and Forecasts 2020-2031 38
3.2 Global Aluminum Die Casting Alloys Revenue by Region 39
3.2.1 Global Aluminum Die Casting Alloys Revenue by Region: 2020 VS 2024 VS 2031 39
3.2.2 Global Aluminum Die Casting Alloys Revenue by Region (2020-2025) 41
3.2.3 Global Aluminum Die Casting Alloys Revenue by Region (2026-2031) 41
3.2.4 Global Aluminum Die Casting Alloys Revenue Market Share by Region (2020-2031) 42
3.3 Global Aluminum Die Casting Alloys Sales Estimates and Forecasts 2020-2031 43
3.4 Global Aluminum Die Casting Alloys Sales by Region 43
3.4.1 Global Aluminum Die Casting Alloys Sales by Region: 2020 VS 2024 VS 2031 43
3.4.2 Global Aluminum Die Casting Alloys Sales by Region (2020-2025) 44
3.4.3 Global Aluminum Die Casting Alloys Sales by Region (2026-2031) 44
3.4.4 Global Aluminum Die Casting Alloys Sales Market Share by Region (2020-2031) 45
3.5 China 46
3.6 Europe 47
3.7 North America 48
3.8 APeC 49
3.9 Middle East, Africa and Latin America 50
4 COMPETITION BY MANUFACTURERS 52
4.1 Global Aluminum Die Casting Alloys Sales by Manufacturers 52
4.1.1 Global Aluminum Die Casting Alloys Sales by Manufacturers (2020-2025) 52
4.1.2 Global Aluminum Die Casting Alloys Sales Market Share by Manufacturers (2020-2025) 53
4.1.3 Global Top 10 and Top 5 Largest Manufacturers of Aluminum Die Casting Alloys in 2024 55
4.2 Global Aluminum Die Casting Alloys Revenue by Manufacturers 55
4.2.1 Global Aluminum Die Casting Alloys Revenue by Manufacturers (2020-2025) 55
4.2.2 Global Aluminum Die Casting Alloys Revenue Market Share by Manufacturers (2020-2025) 56
4.2.3 Global Top 10 and Top 5 Companies by Aluminum Die Casting Alloys Revenue in 2024 58
4.3 Global Aluminum Die Casting Alloys Sales Price by Manufacturers (2020-2025) 59
4.4 Global Key Players of Aluminum Die Casting Alloys, Industry Ranking, 2023 VS 2024 60
4.5 Analysis of Competitive Landscape 61
4.5.1 Manufacturers Market Concentration Ratio (CR5 and HHI) 61
4.5.2 Global Aluminum Die Casting Alloys Market Share by Company Type (Tier 1, Tier 2, and Tier 3) 61
4.6 Global Key Manufacturers of Aluminum Die Casting Alloys, Manufacturing Base Distribution and Headquarters 63
4.7 Global Key Manufacturers of Aluminum Die Casting Alloys, Date of Established 64
5 MARKET SIZE BY TYPE 66
5.1 Global Aluminum Die Casting Alloys Sales by Type 66
5.1.1 Global Aluminum Die Casting Alloys Historical Sales by Type (2020-2025) 66
5.1.2 Global Aluminum Die Casting Alloys Forecasted Sales by Type (2026-2031) 66
5.1.3 Global Aluminum Die Casting Alloys Sales Market Share by Type (2020-2031) 67
5.2 Global Aluminum Die Casting Alloys Revenue by Type 68
5.2.1 Global Aluminum Die Casting Alloys Historical Revenue by Type (2020-2025) 68
5.2.2 Global Aluminum Die Casting Alloys Forecasted Revenue by Type (2026-2031) 69
5.2.3 Global Aluminum Die Casting Alloys Revenue Market Share by Type (2020-2031) 69
5.3 Global Aluminum Die Casting Alloys Price by Type 70
5.3.1 Global Aluminum Die Casting Alloys Price by Type (2020-2025) 70
5.3.2 Global Aluminum Die Casting Alloys Price Forecast by Type (2026-2031) 71
6 MARKET SIZE BY APPLICATION 72
6.1 Global Aluminum Die Casting Alloys Sales by Application 72
6.1.1 Global Aluminum Die Casting Alloys Historical Sales by Application (2020-2025) 72
6.1.2 Global Aluminum Die Casting Alloys Forecasted Sales by Application (2026-2031) 72
6.1.3 Global Aluminum Die Casting Alloys Sales Market Share by Application (2020-2031) 73
6.2 Global Aluminum Die Casting Alloys Revenue by Application 75
6.2.1 Global Aluminum Die Casting Alloys Historical Revenue by Application (2020-2025) 75
6.2.2 Global Aluminum Die Casting Alloys Forecasted Revenue by Application (2026-2031) 76
6.2.3 Global Aluminum Die Casting Alloys Revenue Market Share by Application (2020-2031) 77
6.3 Global Aluminum Die Casting Alloys Price by Application 78
6.3.1 Global Aluminum Die Casting Alloys Price by Application (2020-2025) 78
6.3.2 Global Aluminum Die Casting Alloys Price Forecast by Application (2026-2031) 79
7 NORTH AMERICA 80
7.1 North America Aluminum Die Casting Alloys Market Size by Type 80
7.1.1 North America Aluminum Die Casting Alloys Sales by Type (2020-2031) 80
7.1.2 North America Aluminum Die Casting Alloys Revenue by Type (2020-2031) 81
7.2 North America Aluminum Die Casting Alloys Market Size by Application 82
7.2.1 North America Aluminum Die Casting Alloys Sales by Application (2020-2031) 82
7.2.2 North America Aluminum Die Casting Alloys Revenue by Application (2020-2031) 84
7.3 North America Aluminum Die Casting Alloys Market Size by Country 86
7.3.1 North America Aluminum Die Casting Alloys Revenue by Country: 2020 VS 2024 VS 2031 86
7.3.2 North America Aluminum Die Casting Alloys Revenue by Country (2020-2031) 87
7.3.3 North America Aluminum Die Casting Alloys Sales by Country (2020-2031) 88
7.3.4 US 89
7.3.5 Canada 89
7.3.6 Mexico 90
8 EUROPE 91
8.1 Europe Aluminum Die Casting Alloys Market Size by Type 91
8.1.1 Europe Aluminum Die Casting Alloys Sales by Type (2020-2031) 91
8.1.2 Europe Aluminum Die Casting Alloys Revenue by Type (2020-2031) 92
8.2 Europe Aluminum Die Casting Alloys Market Size by Application 93
8.2.1 Europe Aluminum Die Casting Alloys Sales by Application (2020-2031) 93
8.2.2 Europe Aluminum Die Casting Alloys Revenue by Application (2020-2031) 95
8.3 Europe Aluminum Die Casting Alloys Market Size by Country 97
8.3.1 Europe Aluminum Die Casting Alloys Revenue by Country: 2020 VS 2024 VS 2031 97
8.3.2 Europe Aluminum Die Casting Alloys Sales by Country (2020-2031) 98
8.3.3 Europe Aluminum Die Casting Alloys Revenue by Country (2020-2031) 99
8.3.4 Germany 101
8.3.5 Italy 101
8.3.6 France 102
8.3.7 U.K. 103
8.3.8 Spain 103
8.3.9 Russia 104
9 CHINA 105
9.1 China Aluminum Die Casting Alloys Market Size by Type 105
9.1.1 China Aluminum Die Casting Alloys Sales by Type (2020-2031) 105
9.1.2 China Aluminum Die Casting Alloys Revenue by Type (2020-2031) 106
9.2 China Aluminum Die Casting Alloys Market Size by Application 107
9.2.1 China Aluminum Die Casting Alloys Sales by Application (2020-2031) 107
9.2.2 China Aluminum Die Casting Alloys Revenue by Application (2020-2031) 109
10 APEC 112
10.1 APeC Aluminum Die Casting Alloys Market Size by Type 112
10.1.1 APeC Aluminum Die Casting Alloys Sales by Type (2020-2031) 112
10.1.2 APeC Aluminum Die Casting Alloys Revenue by Type (2020-2031) 113
10.2 APeC Aluminum Die Casting Alloys Market Size by Application 114
10.2.1 APeC Aluminum Die Casting Alloys Sales by Application (2020-2031) 114
10.2.2 APeC Aluminum Die Casting Alloys Revenue by Application (2020-2031) 116
10.3 APeC Aluminum Die Casting Alloys Market Size by Region 118
10.3.1 APeC Aluminum Die Casting Alloys Revenue by Region: 2020 VS 2024 VS 2031 118
10.3.2 APeC Aluminum Die Casting Alloys Revenue by Region (2020-2031) 119
10.3.3 APeC Aluminum Die Casting Alloys Sales by Region (2020-2031) 120
10.3.4 Japan 122
10.3.5 India 122
10.3.6 South Korea 123
10.3.7 Thailand 124
10.3.8 Indonesia 124
10.3.9 Vietnam 125
10.3.10 Malaysia 126
10.3.11 China Taiwan 126
11 MIDDLE EAST, AFRICA AND LATIN AMERICA 128
11.1 Middle East, Africa and Latin America Aluminum Die Casting Alloys Market Size by Type 128
11.1.1 Middle East, Africa and Latin America Aluminum Die Casting Alloys Sales by Type (2020-2031) 128
11.1.2 Middle East, Africa and Latin America Aluminum Die Casting Alloys Revenue by Type (2020-2031) 129
11.2 Middle East, Africa and Latin America Aluminum Die Casting Alloys Market Size by Application 130
11.2.1 Middle East, Africa and Latin America Aluminum Die Casting Alloys Sales by Application (2020-2031) 130
11.2.2 Middle East, Africa and Latin America Aluminum Die Casting Alloys Revenue by Application (2020-2031) 132
11.3 Middle East, Africa and Latin America Aluminum Die Casting Alloys Market Size by Country 134
11.3.1 Middle East, Africa and Latin America Aluminum Die Casting Alloys Revenue by Country: 2020 VS 2024 VS 2031 134
11.3.2 Middle East, Africa and Latin America Aluminum Die Casting Alloys Revenue by Country (2020-2031) 135
11.3.3 Middle East, Africa and Latin America Aluminum Die Casting Alloys Sales by Country (2020-2031) 136
11.3.4 Brazil 138
11.3.5 Turkey 138
11.3.6 Iran 139
11.3.7 South Africa 140
11.3.8 Morocco 140
11.3.9 Saudi Arabia 141
11.3.10 Nigeria 141
11.3.11 Egypt 142
12 CORPORATE PROFILE 143
12.1 Nemak 143
12.1.1 Nemak Company Corporation Information 143
12.1.2 Nemak Main Overview 147
12.1.3 Nemak Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 148
12.1.4 Nemak Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 149
12.1.5 Nemak Aluminum Die Casting Alloys SWOT Analysis 152
12.1.6 Nemak Recent Developments 153
12.2 Ryobi 155
12.2.1 Ryobi Company Corporation Information 155
12.2.2 Ryobi Main Overview 159
12.2.3 Ryobi Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 159
12.2.4 Ryobi Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 160
12.2.5 Ryobi Aluminum Die Casting Alloys SWOT Analysis 163
12.2.6 Ryobi Recent Developments 165
12.3 CITIC Dicastal 166
12.3.1 CITIC Dicastal Company Corporation Information 166
12.3.2 CITIC Dicastal Main Overview 170
12.3.3 CITIC Dicastal Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 171
12.3.4 CITIC Dicastal Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 172
12.3.5 CITIC Dicastal Aluminum Die Casting Alloys SWOT Analysis 174
12.3.6 CITIC Dicastal Recent Developments 175
12.4 Ahresty 177
12.4.1 Ahresty Company Corporation Information 177
12.4.2 Ahresty Main Overview 181
12.4.3 Ahresty Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 182
12.4.4 Ahresty Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 183
12.4.5 Ahresty Aluminum Die Casting Alloys SWOT Analysis 185
12.4.6 Ahresty Recent Developments 186
12.5 Martinrea 187
12.5.1 Martinrea Company Corporation Information 187
12.5.2 Martinrea Main Overview 190
12.5.3 Martinrea Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 191
12.5.4 Martinrea Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 192
12.5.5 Martinrea Aluminum Die Casting Alloys SWOT Analysis 195
12.5.6 Martinrea Recent Developments 196
12.6 IKD 197
12.6.1 IKD Company Corporation Information 197
12.6.2 IKD Main Overview 199
12.6.3 IKD Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 200
12.6.4 IKD Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 201
12.6.5 IKD Aluminum Die Casting Alloys SWOT Analysis 203
12.6.6 IKD Recent Developments 205
12.7 Wencan Group 207
12.7.1 Wencan Group Company Corporation Information 207
12.7.2 Wencan Group Main Overview 210
12.7.3 Wencan Group Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 211
12.7.4 Wencan Group Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 212
12.7.5 Wencan Group Aluminum Die Casting Alloys SWOT Analysis 215
12.7.6 Wencan Group Recent Developments 217
12.8 Guangdong Hongtu 218
12.8.1 Guangdong Hongtu Company Corporation Information 218
12.8.2 Guangdong Hongtu Main Overview 222
12.8.3 Guangdong Hongtu Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 223
12.8.4 Guangdong Hongtu Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 224
12.8.5 Guangdong Hongtu Aluminum Die Casting Alloys SWOT Analysis 225
12.8.6 Guangdong Hongtu Recent Developments 226
12.9 Handtmann 227
12.9.1 Handtmann Company Corporation Information 227
12.9.2 Handtmann Main Overview 231
12.9.3 Handtmann Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 232
12.9.4 Handtmann Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 233
12.9.5 Handtmann Aluminum Die Casting Alloys SWOT Analysis 235
12.9.6 Handtmann Recent Developments 237
12.10 Aludyne 238
12.10.1 Aludyne Company Corporation Information 238
12.10.2 Aludyne Main Overview 242
12.10.3 Aludyne Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 243
12.10.4 Aludyne Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 244
12.10.5 Aludyne Aluminum Die Casting Alloys SWOT Analysis 249
12.10.6 Aludyne Recent Developments 251
12.11 Pace Industries 252
12.11.1 Pace Industries Company Corporation Information 252
12.11.2 Pace Industries Main Overview 254
12.11.3 Pace Industries Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 255
12.11.4 Pace Industries Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 256
12.11.5 Pace Industries Aluminum Die Casting Alloys SWOT Analysis 257
12.11.6 Pace Industries Recent Developments 259
12.12 Endurance Technologies 260
12.12.1 Endurance Technologies Company Corporation Information 260
12.12.2 Endurance Technologies Main Overview 262
12.12.3 Endurance Technologies Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 263
12.12.4 Endurance Technologies Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 264
12.12.5 Endurance Technologies Aluminum Die Casting Alloys SWOT Analysis 266
12.12.6 Endurance Technologies Recent Developments 268
12.13 Chongqing Millison 269
12.13.1 Chongqing Millison Company Corporation Information 269
12.13.2 Chongqing Millison Main Overview 272
12.13.3 Chongqing Millison Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 273
12.13.4 Chongqing Millison Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 273
12.13.5 Chongqing Millison Aluminum Die Casting Alloys SWOT Analysis 276
12.13.6 Chongqing Millison Recent Developments 277
12.14 Rockman Industries 278
12.14.1 Rockman Industries Company Corporation Information 278
12.14.2 Rockman Industries Main Overview 282
12.14.3 Rockman Industries Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 283
12.14.4 Rockman Industries Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 283
12.14.5 Rockman Industries Aluminum Die Casting Alloys SWOT Analysis 286
12.14.6 Rockman Industries Recent Developments 288
12.15 Georg Fischer 289
12.15.1 Georg Fischer Company Corporation Information 289
12.15.2 Georg Fischer Main Overview 292
12.15.3 Georg Fischer Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 293
12.15.4 Georg Fischer Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 294
12.15.5 Georg Fischer Aluminum Die Casting Alloys SWOT Analysis 296
12.15.6 Georg Fischer Recent Developments 297
12.16 Rheinmetall 299
12.16.1 Rheinmetall Company Corporation Information 299
12.16.2 Rheinmetall Main Overview 303
12.16.3 Rheinmetall Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 304
12.16.4 Rheinmetall Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 304
12.16.5 Rheinmetall Aluminum Die Casting Alloys SWOT Analysis 306
12.16.6 Rheinmetall Recent Developments 308
12.17 Gnutti Carlo 308
12.17.1 Gnutti Carlo Company Corporation Information 309
12.17.2 Gnutti Carlo Main Overview 311
12.17.3 Gnutti Carlo Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 312
12.17.4 Gnutti Carlo Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 313
12.17.5 Gnutti Carlo Aluminum Die Casting Alloys SWOT Analysis 315
12.17.6 Gnutti Carlo Recent Developments 317
12.18 LTH 318
12.18.1 LTH Company Corporation Information 318
12.18.2 LTH Main Overview 321
12.18.3 LTH Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 322
12.18.4 LTH Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 322
12.18.5 LTH Aluminum Die Casting Alloys SWOT Analysis 324
12.18.6 LTH Recent Developments 326
12.19 Jiangsu Rongtai 327
12.19.1 Jiangsu Rongtai Company Corporation Information 327
12.19.2 Jiangsu Rongtai Main Overview 331
12.19.3 Jiangsu Rongtai Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 332
12.19.4 Jiangsu Rongtai Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 333
12.19.5 Jiangsu Rongtai Aluminum Die Casting Alloys SWOT Analysis 337
12.19.6 Jiangsu Rongtai Recent Developments 339
12.20 Nanjing Chervon 340
12.20.1 Nanjing Chervon Company Corporation Information 340
12.20.2 Nanjing Chervon Main Overview 343
12.20.3 Nanjing Chervon Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 344
12.20.4 Nanjing Chervon Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 344
12.20.5 Nanjing Chervon Aluminum Die Casting Alloys SWOT Analysis 348
12.20.6 Nanjing Chervon Recent Developments 349
12.21 Teksid 351
12.21.1 Teksid Company Corporation Information 351
12.21.2 Teksid Main Overview 354
12.21.3 Teksid Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 355
12.21.4 Teksid Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 355
12.21.5 Teksid Aluminum Die Casting Alloys SWOT Analysis 357
12.21.6 Teksid Recent Developments 359
12.22 Ningbo Xusheng 359
12.22.1 Ningbo Xusheng Company Corporation Information 359
12.22.2 Ningbo Xusheng Main Overview 363
12.22.3 Ningbo Xusheng Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 364
12.22.4 Ningbo Xusheng Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 364
12.22.5 Ningbo Xusheng Aluminum Die Casting Alloys SWOT Analysis 368
12.22.6 Ningbo Xusheng Recent Developments 370
12.23 DGS 371
12.23.1 DGS Company Corporation Information 371
12.23.2 DGS Main Overview 375
12.23.3 DGS Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 376
12.23.4 DGS Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 376
12.23.5 DGS Aluminum Die Casting Alloys SWOT Analysis 378
12.23.6 DGS Recent Developments 380
12.24 Guangdong Hongte 380
12.24.1 Guangdong Hongte Company Corporation Information 380
12.24.2 Guangdong Hongte Main Overview 384
12.24.3 Guangdong Hongte Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 385
12.24.4 Guangdong Hongte Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 385
12.24.5 Guangdong Hongte Aluminum Die Casting Alloys SWOT Analysis 387
12.24.6 Guangdong Hongte Recent Developments 389
12.25 Gibbs 390
12.25.1 Gibbs Company Corporation Information 390
12.25.2 Gibbs Main Overview 392
12.25.3 Gibbs Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 393
12.25.4 Gibbs Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 394
12.25.5 Gibbs Aluminum Die Casting Alloys SWOT Analysis 396
12.25.6 Gibbs Recent Developments 398
12.26 Foryou 399
12.26.1 Foryou Company Corporation Information 399
12.26.2 Foryou Main Overview 403
12.26.3 Foryou Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 404
12.26.4 Foryou Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 404
12.26.5 Foryou Aluminum Die Casting Alloys SWOT Analysis 407
12.26.6 Foryou Recent Developments 410
12.27 Form Technologies 411
12.27.1 Form Technologies Company Corporation Information 411
12.27.2 Form Technologies Main Overview 415
12.27.3 Form Technologies Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 416
12.27.4 Form Technologies Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 416
12.27.5 Form Technologies Aluminum Die Casting Alloys SWOT Analysis 418
12.27.6 Form Technologies Recent Developments 420
12.28 Suzhou Yadelin 420
12.28.1 Suzhou Yadelin Company Corporation Information 420
12.28.2 Suzhou Yadelin Main Overview 425
12.28.3 Suzhou Yadelin Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 426
12.28.4 Suzhou Yadelin Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 427
12.28.5 Suzhou Yadelin Aluminum Die Casting Alloys SWOT Analysis 429
12.28.6 Suzhou Yadelin Recent Developments 431
12.29 Ningbo Spey 432
12.29.1 Ningbo Spey Company Corporation Information 433
12.29.2 Ningbo Spey Main Overview 437
12.29.3 Ningbo Spey Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 438
12.29.4 Ningbo Spey Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 438
12.29.5 Ningbo Spey Aluminum Die Casting Alloys SWOT Analysis 441
12.29.6 Ningbo Spey Recent Developments 443
12.30 Sandhar 444
12.30.1 Sandhar Company Corporation Information 444
12.30.2 Sandhar Main Overview 447
12.30.3 Sandhar Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 448
12.30.4 Sandhar Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 448
12.30.5 Sandhar Aluminum Die Casting Alloys SWOT Analysis 451
12.30.6 Sandhar Recent Developments 453
12.31 Eontec 454
12.31.1 Eontec Company Corporation Information 454
12.31.2 Eontec Main Overview 457
12.31.3 Eontec Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 458
12.31.4 Eontec Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 459
12.31.5 Eontec Aluminum Die Casting Alloys SWOT Analysis 461
12.31.6 Eontec Recent Developments 463
12.32 MK Tron 464
12.32.1 MK Tron Company Corporation Information 464
12.32.2 MK Tron Main Overview 468
12.32.3 MK Tron Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 469
12.32.4 MK Tron Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 469
12.32.5 MK Tron Aluminum Die Casting Alloys SWOT Analysis 471
12.32.6 MK Tron Recent Developments 472
12.33 Tatfook 473
12.33.1 Tatfook Company Corporation Information 473
12.33.2 Tatfook Main Overview 475
12.33.3 Tatfook Aluminum Die Casting Alloys Capacity, Sales, Price, Revenue and Gross Margin (2020-2025) 476
12.33.4 Tatfook Aluminum Die Casting Alloys Product Model Numbers, Pictures, Descriptions and Specifications 476
12.33.5 Tatfook Aluminum Die Casting Alloys SWOT Analysis 478
12.33.6 Tatfook Recent Developments 479
13 INDUSTRY CHAIN AND SALES CHANNELS ANALYSIS 481
13.1 Aluminum Die Casting Alloys Industry Chain Analysis 481
13.2 Aluminum Die Casting Alloys Key Raw Materials 483
13.2.1 Key Raw Materials 484
13.2.2 Raw Materials Key Suppliers 486
13.3 Aluminum Die Casting Alloys Production Mode & Process 491
13.4 Aluminum Die Casting Alloys Sales and Marketing 494
13.5 Aluminum Die Casting Alloys Customers 495
14 ALUMINUM DIE CASTING ALLOYS MARKET DYNAMICS 499
14.1.1 Aluminum Die Casting Alloys Industry Trends 499
14.1.2 Aluminum Die Casting Alloys Market Drivers 504
14.1.3 Aluminum Die Casting Alloys Market Challenges 507
14.1.4 Aluminum Die Casting Alloys Market Restraints 510
15 KEY FINDINGS IN THE GLOBAL ALUMINUM DIE CASTING ALLOYS STUDY 516
16 APPENDIX 522
16.1 Research Methodology 522
16.1.1 Methodology/Research Approach 522
16.1.2 Data Source 525
16.2 Author Details 527