Summary

Metal Pipe Market

The future of the global metal pipe market looks promising with opportunities in the oil & gas, potable water, wastewater, power generation, automotive, and HVAC & electrical markets. The global metal pipe market is expected to reach an estimated $248.5 billion by 2035 from $145.7 billion in 2027 with a CAGR of 6.9% from 2027 to 2035. The major drivers for this market are the growing demand in construction & real estate sector, the increasing demand for durable & high-strength piping systems, and the rising demand for replacement of old and corroded pipelines.

• Lucintel forecasts that, within the material category, steel pipes is expected to witness the highest growth over the forecast period due to the superior strength and durability in harsh conditions.
• Within the end use category, oil & gas is expected to witness the highest growth over the forecast period due to the increasing oil and gas exploration activities.
• In terms of regions, APAC will remain the largest region over the forecast period due to the rapid industrialization and infrastructure development expansion.

Gain valuable insights for your business decisions with our comprehensive 150+ page report. Sample figures with some insights are shown below.

Emerging Trends in Metal Pipe Market

The metal pipe market will shift between 2025 and 2027, with greater focus on engineered solutions as opposed to bulk supply. Simultaneously, there will be changes in the requirements for large infrastructure projects, as well as the focus on carbon and other emissions. During this period, the Metal Piping industry is expected to grow. However, due to regional limits, some suppliers will be unable to meet the needs of all projects. This will lead to increased differentiation in the metal piping industry.

• Sustainability: In line with the goals of the industry to reduce carbon footprint and government regulations, many clients will require piping supplied to their projects meet various carbon requirements. As such, there will be increased focus on the life cycle assessment of piping supplied, starting from the raw materials. This will require the sourcing of piping that meets various, and at times competing, environmental requirements.
• Energy Transition: The focus will be on the piping needed for the transport and storage of hydrogen as well as other gases, as well as piping needed for other carbon capture and storage projects. The International Energy Agency expects significant increases in the additions of renewable energy projects. As such, a focus on metallic piping for energy transition projects is expected.
• Digital Manufacturing: In the coming years, expect continuous quality control with machine vision systems. Also, look for improvements in scrap rates, part-to-part consistency, and the economic manufacture of small, customized, batches of parts.
• Regional Supply Diversification: Consumers have been motivated by recent disruptions in international trades to use multiple source/supplier countries. Meanwhile, domestic capacity building in European and North American Mills will further diversify regional supply. Additionally, the US infrastructure bill will increase regional pipe demand and foster a dual source/supply strategy.
• Advanced Materials: Higher upstream costs associated with extending the service life of capital equipment will increase the use of more expensive materials like nickel alloys, duplex stainless steels and other high-by-high-cost materials. These trends will benefit material suppliers in the Oil and Gas, and Chemical Processing industries as well as other industries with similar processing requirements.

We expect the overall market to be stable. However, the products that will comprise the market will significantly change. We believe the best opportunity will exist for suppliers that focus on the Infrastructure and Industrial markets.

Recent Developments in the Metal Pipe Market

The metal pipe market is expected to revitalize in the next few years as different geopolitical strategies impacting energy and other industries create new markets. As these changes occur, pipe producers will focus on manufacture high-end line pipe and other specialized products. According to Lucintel, the principal markets for these products will be in oil and gas, construction, and other similar industries.

• Replacing Existing Products: Tenaris is spending $1.2 billion to build a pipe production facility in Bay City, Texas. The new facility is expected to significantly strengthen the supply of pipelines to the energy industry and other customers in North America.
• Restarting Production: After several years of little to no activity, the pipe production facility in Mülheim, Germany, has resumed production. The activity is expected to further strengthen the supply of pipelines to European customers.
• Research Partnerships: Nippon Steel and Vallourec announced that they will collaborate to research and develop pipe products to be used in the production and transport of hydrogen and other products in the carbon capture and storage industry.
• Government Approval: Millions of dollars awarded in January 2025 by the U.S. Department of Energy to decarbonize industry and steel will help pay for facilities to adopt lower carbon emission technology. Mills that adopt the new technology will be able to produce pipe-grade steel in a more sustainable way and be rewarded for doing so with even greater consumer demand for low carbon steel.
• New Steel Grades: In May 2025, Sandvik released a new line of stainless-steel pipe grades for the energy industry. These grades are expected to have even greater service performance and raise the average selling prices for Sandvik steel.

Increased focus is being placed on the energy industry and the transition to a greener economy to create opportunities for steel producers to vertically integrate, differentiate, and strengthen their positions. Anti-competitive consolidation is expected over the next several years, especially among producers of commodity pipe. These same producers are expected to remain reliant on limited cycle construction, high tariffs, and erratic steel prices.

Strategic Growth Opportunities in the Metal Pipe Market

The metal pipe market is expected to expand in the next few years as more oil and gas pipelines, and other infrastructure projects are developed. An improving business environment for manufacturing could also boost the market for metal pipes. Metal pipes are expected to be in higher demand in the coming years, and there will be increased focus on the performance of the pipes over their service life. supplier. It is important for metal pipe manufacturers to position themselves to meet the specific demands of the consumer.

• Hydrogen Infrastructure: Many metal pipe manufacturers have the necessary equipment to produce pipelines that are capable of transporting hydrogen. Metal pipe manufacturers also have the capability to produce the pipelines, but it requires more precise welding techniques to be employed. In January 2025, the European Commission announced their selection of 176 hydrogen infrastructure projects. Increased focus on hydrogen infrastructure will create demand for other metal pipeline systems.
• Carbon Capture Infrastructure: Metal pipelines are also used to transport carbon dioxide to storage facilities. In September 2025, the Global CCS Institute reported that there were 50 large-scale carbon capture storage projects in operation. There are many other projects still in the planning and development phase.
• Data Centre Cooling: Closed-loop cooling systems are used to cool the hyperscale data centres that are advancing stainless steel and specialty carbon pipe manufacturing. According to Synergy Research Group, global data-centre commercial and industrial energy capacity hit 100 GW in 2022. Rising demand for data-centre computing power will create long-term requirements for the control of corrosion, prefabrication, and the even distribution of fluids.
• Water Reuse: The increased demand for recycled industrial water and water reuse by municipalities will create new markets for stainless and ductile iron pipe. In 2022, the U.S. Bureau of Reclamation allocated $180 million for water recycling projects. Reduced water availability will increase the need for water recycling and other water infrastructure projects.
• Digital Manufacturing: Increased adoption of digital manufacturing will allow smaller runs to be produced economically. In 2022, Hexagon estimated digital manufacturing improved customers’ material utilization by 20%. Improved integration of manufacturing processes will reduce waste and increase profits.

The expansion of the energy transition and the refocus on efficient manufacturing will allow companies to differentiate themselves based on safety, reliability, and performance. Companies should invest in applications and regions most likely to benefit from the energy transition and manufacture differentiated products based on performance data.

Metal Pipe Market Drivers and Challenges

Progress in technology and the construction industry, as well as increasing environmental awareness and regulations, are positively impacting the metal pipe market. The uncertain impact of raw material prices and international trade on metal pipe industry is of major concern. Lucintel expects the above-mentioned factors will shape the metal pipe market for the next few years.

The factors responsible for driving this market include:

• Investment in Infrastructure: The continuous replacement and upgrading of water, sewage and other distribution networks requires the use of steel pipes. The U.S. Environmental Protection Agency’s announcement to allocate $6.5 billion in 2025 for the Clean Water State Revolving Funds will help fund water infrastructure projects. Metal pipes are used in various parts of water treatment and distribution projects. During the same period, many developing countries are also embarking on similar projects to meet the infrastructure needs of the growing and imported industry. The above projects will provide a stable market for metal pipes in the short term.
• Energy Transition: Hydrogen, carbon capture, and other forms of power generation and energy transport are expanding, creating new market opportunities for specialty metal pipes. The European Union’s December 2025 target auction of €1.2 billion for its revised “hydrogen bank” framework is expected to accelerate hydrogen production and related infrastructure. All of these projects will require highly specialized piping. Increasing energy production and transport variability will require piping systems to move and transform energy. In the coming years, systems and piping will need to be designed and constructed to withstand greater variability.
• Infrastructure Build-out: The expansion of industry and construction will create continued demand for piping to raise and circulate water, construct and support structures, and other process functions. The World Steel Association projects 2025 will see a 1.2% increase in global steel usage. New piping systems will be needed to support the increasing building and production in the Middle East and Africa. The piping industry is expected to benefit from new industrial and residential construction in these regions in the next 3 to 5 years. The effect of global economic slowdowns may be felt by the piping industry if construction and manufacturing slow in these regions.
• Product Innovation and Digital Manufacturing: There are several advancements in pipe production, including the use of high-strength alloys and coatings, automated welding, and non-destructive testing. Digital methods of quality control are also gaining traction. In January 2025, the International Organization for Standardization (ISO) published ISO 3183:2025 and specified updated requirements for the design and the construction of pipelines for the transportation of petroleum and natural gas. New methods of product development, such as the use of sensors and AI, help pipemakers gain a competitive edge by eliminating defects and improving traceability. High-tech, customized pipe products find usage in arduous applications, like those in the offshore oil and gas industry. In the next 3 to 5 years, there will be significant focus on the most efficient means to produce pipes, instead of just producing the most pipes, thereby creating a competitive marketplace based on performance and service.
• Sustainability and Circularity: There is increasing demand for pipes manufactured using raw materials and processes which reduce carbon emissions, and increased energy efficiency. As of January 2026, the European Union’s Carbon Border Adjustment Mechanism shifted the bloc’s focus to reducing carbon emissions. Pipes manufactured using steel are relatively easy to recycle. In addition, there is growing interest in the use of metallic pipes in energy and service water transport, and for building and construction. The next 3 to 5 years will see producers of pipes and pipe fittings shift their focus to circularity and reducing their carbon footprint in order to improve their competitiveness in the market.

The challenges facing this market include:

• Raw Material Price Volatility: Metal pipe producers are susceptible to variations in the prices of key inputs such as iron ore, scrap, coal, aluminium and nickel, and other energy and freight costs. The cash price of aluminium on the London Metal Exchange was around $3,000/metric ton in February 2025. Rising costs of raw materials and other inputs compressed the margins of producers of aluminium and other non-ferrous products, and caused uncertainty in the market. Customers of aluminium and other non-ferrous products waited for the market to stabilize before making purchases. Producers of non-ferrous products are expected to adopt various strategies such as hedging, flexible contracts and re-locating their production facilities in the next 3-5 years. Price volatility is expected to continue and it will continue to Hamper long term project planning.
• Trade Barriers and Supply Chain Disruptions: The International Trade measures and geo-political situations also affect the availability of raw materials and finished products. In February 2025, the US imposed a 25% import tariff on steel under Section 232. Producers and consumers of steel downstream of the US market became uncertain about their supply and demand. Trade Barriers increase prices of imported goods and may lead to more exports, and vice versa. It may also lead to Supply shortages and oversupply in a region. Producers of goods are expected to manufacture more goods in a variety of locations and ensure that their production and supply processes comply with the varying international trade laws.
• Environmental Compliance and Capital Intensity: The capital and resource intensiveness of pipe production increases with the stringency of environmental regulations, and the construction and operation of emissions and safety-related facilities. Continuous investment in pollution control will be necessary. Emissions from metal production and other intensively energy-related industrial processes and products have come under increased scrutiny. Of particular mention is the strategic intervention by the International Maritime Organization to mitigate the carbon footprint of international shipping. It is expected that smaller pipe producers will find it increasingly challenging to access the capital to implement state-of-the-art continuously emissions- and energy-reducing processes, wastewater treatment and digital control and monitoring. Long-term needs for pipe production will continue to be underpinned by the strengthening global economy, expanding populations and the energy transition. Pipe producers will have to balance continuous improvements to sustainability and operational intensity in the face of economic cycles, trade wars and climate policy.

The metal pipe industry is expected to undergo positive changes in the medium- and long-term due to increasing global requirements and regulations, the need for improvements in energy and other industries, and technological innovations. There will also be challenges including the need for continuous improvements and upgrades, especially due to environmental regulations and trade restrictions. Other challenges will include the ability to supply raw materials and meet the needs of customers at an acceptable price while also balancing the negative impact on the environment. Demand for pipes is expected to increase in the medium- and long-term and especially so for those made from advanced materials, but price and regulations will also play a role.

List of Metal Pipe Market Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. Through these strategies metal pipe market companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the metal pipe market companies profiled in this report include-

• Tenaris
• Vallourec
• TMK
• Saint Gobain
• ArcelorMittal
• Nippon Steel and Sumitomo Metals
• United States Steel Corporation
• Mueller Industries
• Kaiser Aluminum
• Amiantit

Metal Pipe Market by Segment

The study includes a forecast for the global metal pipe market by material, diameter, pressure rating, end use, and region.

Metal Pipe Market by Material [Value ($M) from 2019 to 2035]:

• Steel Pipes
• Ductile Iron Pipes
• Copper Pipes
• Other Material Pipes

Metal Pipe Market by Diameter [Value ($M) from 2019 to 2035]:

• Small Diameter Pipes
• Large Diameter Pipes

Metal Pipe Market by Pressure Rating [Value ($M) from 2019 to 2035]:

• Less than 300 psi Pressure Pipes
• 300-1000 psi Pressure Pipes
• 1000-3000 psi Pressure Pipes
• More than 3000 psi Pressure Pipes

Metal Pipe Market by End Use [Value ($M) from 2019 to 2035]:

• Oil & Gas
• Potable Water
• Wastewater
• Power Generation
• Automotive
• HVAC & Electrical
• Others

Metal Pipe Market by Region [Value ($M) from 2019 to 2035]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the Metal Pipe Market

The metal pipe market is expected to change due to changes in infrastructure investment and steel production in various countries with the goal of reducing greenhouse gas emissions. According to Lucintel, changes in these market conditions are expected to result in the preference of regional markets, and pipe producers focus on higher value-added products.

• United States: Protectionist policy and production capacity may result in greater use of domestic pipe mills. The Biden administration extended the 25% steel tariff (which is on many pipes mill inputs) in February 2025 and Nucor continued construction of a new $3.1 billion hot rolled mill in Brandenburg, Kentucky (also announced in February 2025). It is expected that these policies would lead the producers to source and utilize domestically pipe mills.
• China: Protectionist policy and industrial upgrading may create a situation where Chinese mills concentrate on high end products. China cancelled export tax rebates of pipe and other steel products in December 2024. It is expected that mills would concentrate more on domestic sales and higher value-added products.
• Germany: Salzgitter’s investment in SALCOS demonstrates a commitment to producing over 1.9 million tons of low-carbon steel through the construction of multiple electric-arc furnaces beginning in 2026. The first of these is scheduled to be completed in 2026. The availability of low-carbon steel will impact procuring pipelines in the EU. The certification of low-carbon steel and customer acceptance will determine market share.
• India: There have been continued investments in existing steel-making facilities and the alignment of infrastructure by steel-making companies and the government. The implementation of large public works projects and domestic steel preferences are likely to boost the demand for pipelines in the utility, transportation and other sectors, during the next 3-5 years.
• Japan: During the year, Nippon Steel expanded into the US steel market with the acquisition of United States Steel for $14.9 billion. This should provide Nippon Steel the means and access to customers for high quality steel in the US and other markets.

Features of the Global Metal Pipe Market
Market Size Estimates: metal pipe market size estimation in terms of value ($M).
Trend and Forecast Analysis: Market trends (2019 to 2026) and forecast (2027 to 2035) by various segments and regions.
Segmentation Analysis: metal pipe market size by various segments, such as by material, diameter, pressure rating, end use, and region in terms of value ($M).
Regional Analysis: metal pipe market breakdown by North America, Europe, Asia Pacific, and Rest of the World.
Growth Opportunities: Analysis of growth opportunities in different material, diameter, pressure rating, end use, and regions for the metal pipe market.
Strategic Analysis: This includes M&A, new product development, and competitive landscape of the metal pipe market.
Analysis of competitive intensity of the industry based on Porter’s Five Forces model.

If you are looking to expand your business in this or adjacent markets, then contact us. We have done hundreds of strategic consulting projects in market entry, opportunity screening, due diligence, supply chain analysis, M & A, and more.

This report answers following 11 key questions:
Q.1. What are some of the most promising, high-growth opportunities for the metal pipe market by material (steel pipes, ductile iron pipes, copper pipes, and other material pipes), diameter (small diameter pipes and large diameter pipes), pressure rating (less than 300 psi pressure pipes, 300-1000 psi pressure pipes, 1000-3000 psi pressure pipes, and more than 3000 psi pressure pipes), end use (oil & gas, potable water, wastewater, power generation, automotive, HVAC & electrical, and others), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
Q.2. Which segments will grow at a faster pace and why?
Q.3. Which region will grow at a faster pace and why?
Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
Q.5. What are the business risks and competitive threats in this market?
Q.6. What are the emerging trends in this market and the reasons behind them?
Q.7. What are some of the changing demands of customers in the market?
Q.8. What are the new developments in the market? Which companies are leading these developments?
Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?

ページTOPに戻る

Table of Contents

Table of Contents

1. Executive Summary
2. Market Overview
2.1 Background and Classifications
2.2 Supply Chain
3. Market Trends & Forecast Analysis
3.1 Macroeconomic Trends and Forecasts
3.2 Industry Drivers and Challenges
3.3 PESTLE Analysis
3.4 Patent Analysis
3.5 Regulatory Environment
3.6 Global Metal Pipe Market Trends and Forecast
4. Global Metal Pipe Market by Material
4.1 Overview
4.2 Attractiveness Analysis by Material
4.3 Steel Pipes : Trends and Forecast (2019 to 2035)
4.4 Ductile Iron Pipes : Trends and Forecast (2019 to 2035)
4.5 Copper Pipes : Trends and Forecast (2019 to 2035)
4.6 Other Material Pipes : Trends and Forecast (2019 to 2035)
5. Global Metal Pipe Market by Diameter
5.1 Overview
5.2 Attractiveness Analysis by Diameter
5.3 Small Diameter Pipes : Trends and Forecast (2019 to 2035)
5.4 Large Diameter Pipes : Trends and Forecast (2019 to 2035)
6. Global Metal Pipe Market by Pressure Rating
6.1 Overview
6.2 Attractiveness Analysis by Pressure Rating
6.3 Less than 300 psi Pressure Pipes : Trends and Forecast (2019 to 2035)
6.4 300-1000 psi Pressure Pipes : Trends and Forecast (2019 to 2035)
6.5 1000-3000 psi Pressure Pipes : Trends and Forecast (2019 to 2035)
6.6 More than 3000 psi Pressure Pipes : Trends and Forecast (2019 to 2035)
7. Global Metal Pipe Market by End Use
7.1 Overview
7.2 Attractiveness Analysis by End Use
7.3 Oil & Gas : Trends and Forecast (2019 to 2035)
7.4 Potable Water : Trends and Forecast (2019 to 2035)
7.5 Wastewater : Trends and Forecast (2019 to 2035)
7.6 Power Generation : Trends and Forecast (2019 to 2035)
7.7 Automotive : Trends and Forecast (2019 to 2035)
7.8 HVAC & Electrical : Trends and Forecast (2019 to 2035)
7.9 Others : Trends and Forecast (2019 to 2035)
8. Regional Analysis
8.1 Overview
8.2 Global Metal Pipe Market by Region
9. North American Metal Pipe Market
9.1 Overview
9.2 North American Metal Pipe Market by Material
9.3 North American Metal Pipe Market by End Use
9.4 The United States Metal Pipe Market
9.5 Canadian Metal Pipe Market
9.6 Mexican Metal Pipe Market
10. European Metal Pipe Market
10.1 Overview
10.2 European Metal Pipe Market by Material
10.3 European Metal Pipe Market by End Use
10.4 German Metal Pipe Market
10.5 French Metal Pipe Market
10.6 Italian Metal Pipe Market
10.7 Spanish Metal Pipe Market
10.8 The United Kingdom Metal Pipe Market
11. APAC Metal Pipe Market
11.1 Overview
11.2 APAC Metal Pipe Market by Material
11.3 APAC Metal Pipe Market by End Use
11.4 Chinese Metal Pipe Market
11.5 Indian Metal Pipe Market
11.6 Japanese Metal Pipe Market
11.7 South Korean Metal Pipe Market
11.8 Indonesian Metal Pipe Market
12. ROW Metal Pipe Market
12.1 Overview
12.2 ROW Metal Pipe Market by Material
12.3 ROW Metal Pipe Market by End Use
12.4 Middle Eastern Metal Pipe Market
12.5 South American Metal Pipe Market
12.6 African Metal Pipe Market
13. Competitor Analysis
13.1 Product Portfolio Analysis
13.2 Operational Integration
13.3 Porter’s Five Forces Analysis
• Competitive Rivalry
• Bargaining Power of Buyers
• Bargaining Power of Suppliers
• Threat of Substitutes
• Threat of New Entrants
13.4 Market Share Analysis
14. Opportunities & Strategic Analysis
14.1 Value Chain Analysis
14.2 Growth Opportunity Analysis
14.2.1 Growth Opportunity by Material
14.2.2 Growth Opportunity by Diameter
14.2.3 Growth Opportunity by Pressure Rating
14.2.4 Growth Opportunity by End Use
14.2.5 Growth Opportunity by Region
14.3 Emerging Trends in the Global Metal Pipe Market
14.4 Strategic Analysis
14.4.1 New Product Development
14.4.2 Certification and Licensing
14.4.3 Mergers, Acquisitions, Agreements, Collaborations, and Joint Ventures
15. Company Profiles of the Leading Players Across the Value Chain
15.1 Competitive Analysis Overview
15.2 Tenaris
• Company Overview
• Metal Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
15.3 Vallourec
• Company Overview
• Metal Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
15.4 TMK
• Company Overview
• Metal Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
15.5 Saint Gobain
• Company Overview
• Metal Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
15.6 ArcelorMittal
• Company Overview
• Metal Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
15.7 Nippon Steel and Sumitomo Metals
• Company Overview
• Metal Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
15.8 United States Steel Corporation
• Company Overview
• Metal Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
15.9 Mueller Industries
• Company Overview
• Metal Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
15.10 Kaiser Aluminum
• Company Overview
• Metal Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
15.11 Amiantit
• Company Overview
• Metal Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
16. Appendix
16.1 List of Figures
16.2 List of Tables
16.3 Research Methodology
16.4 Disclaimer
16.5 Copyright
16.6 Abbreviations and Technical Units
16.7 About Us
16.8 Contact Us

ページTOPに戻る

List of Tables/Graphs

List of Figures

Chapter 1
Figure 1.1: Trends and Forecast for the Global Metal Pipe Market
Chapter 2
Figure 2.1: Usage of Metal Pipe Market
Figure 2.2: Classification of the Global Metal Pipe Market
Figure 2.3: Supply Chain of the Global Metal Pipe Market
Chapter 3
Figure 3.1: Trends of the Global GDP Growth Rate
Figure 3.2: Trends of the Global Population Growth Rate
Figure 3.3: Trends of the Global Inflation Rate
Figure 3.4: Trends of the Global Unemployment Rate
Figure 3.5: Trends of the Regional GDP Growth Rate
Figure 3.6: Trends of the Regional Population Growth Rate
Figure 3.7: Trends of the Regional Inflation Rate
Figure 3.8: Trends of the Regional Unemployment Rate
Figure 3.9: Trends of Regional Per Capita Income
Figure 3.10: Forecast for the Global GDP Growth Rate
Figure 3.11: Forecast for the Global Population Growth Rate
Figure 3.12: Forecast for the Global Inflation Rate
Figure 3.13: Forecast for the Global Unemployment Rate
Figure 3.14: Forecast for the Regional GDP Growth Rate
Figure 3.15: Forecast for the Regional Population Growth Rate
Figure 3.16: Forecast for the Regional Inflation Rate
Figure 3.17: Forecast for the Regional Unemployment Rate
Figure 3.18: Forecast for Regional Per Capita Income
Figure 3.19: Driver and Challenges of the Metal Pipe Market
Chapter 4
Figure 4.1: Global Metal Pipe Market by Material in 2019, 2026, and 2035
Figure 4.2: Trends of the Global Metal Pipe Market ($M) by Material
Figure 4.3: Forecast for the Global Metal Pipe Market ($M) by Material
Figure 4.4: Trends and Forecast for Steel Pipes in the Global Metal Pipe Market (2019-2035)
Figure 4.5: Trends and Forecast for Ductile Iron Pipes in the Global Metal Pipe Market (2019-2035)
Figure 4.6: Trends and Forecast for Copper Pipes in the Global Metal Pipe Market (2019-2035)
Figure 4.7: Trends and Forecast for Other Material Pipes in the Global Metal Pipe Market (2019-2035)
Chapter 5
Figure 5.1: Global Metal Pipe Market by Diameter in 2019, 2026, and 2035
Figure 5.2: Trends of the Global Metal Pipe Market ($M) by Diameter
Figure 5.3: Forecast for the Global Metal Pipe Market ($M) by Diameter
Figure 5.4: Trends and Forecast for Small Diameter Pipes in the Global Metal Pipe Market (2019-2035)
Figure 5.5: Trends and Forecast for Large Diameter Pipes in the Global Metal Pipe Market (2019-2035)
Chapter 6
Figure 6.1: Global Metal Pipe Market by Pressure Rating in 2019, 2026, and 2035
Figure 6.2: Trends of the Global Metal Pipe Market ($M) by Pressure Rating
Figure 6.3: Forecast for the Global Metal Pipe Market ($M) by Pressure Rating
Figure 6.4: Trends and Forecast for Less than 300 psi Pressure Pipes in the Global Metal Pipe Market (2019-2035)
Figure 6.5: Trends and Forecast for 300-1000 psi Pressure Pipes in the Global Metal Pipe Market (2019-2035)
Figure 6.6: Trends and Forecast for 1000-3000 psi Pressure Pipes in the Global Metal Pipe Market (2019-2035)
Figure 6.7: Trends and Forecast for More than 3000 psi Pressure Pipes in the Global Metal Pipe Market (2019-2035)
Chapter 7
Figure 7.1: Global Metal Pipe Market by End Use in 2019, 2026, and 2035
Figure 7.2: Trends of the Global Metal Pipe Market ($M) by End Use
Figure 7.3: Forecast for the Global Metal Pipe Market ($M) by End Use
Figure 7.4: Trends and Forecast for Oil & Gas in the Global Metal Pipe Market (2019-2035)
Figure 7.5: Trends and Forecast for Potable Water in the Global Metal Pipe Market (2019-2035)
Figure 7.6: Trends and Forecast for Wastewater in the Global Metal Pipe Market (2019-2035)
Figure 7.7: Trends and Forecast for Power Generation in the Global Metal Pipe Market (2019-2035)
Figure 7.8: Trends and Forecast for Automotive in the Global Metal Pipe Market (2019-2035)
Figure 7.9: Trends and Forecast for HVAC & Electrical in the Global Metal Pipe Market (2019-2035)
Figure 7.10: Trends and Forecast for Others in the Global Metal Pipe Market (2019-2035)
Chapter 8
Figure 8.1: Trends of the Global Metal Pipe Market ($M) by Region (2019-2026)
Figure 8.2: Forecast for the Global Metal Pipe Market ($M) by Region (2027-2035)
Chapter 9
Figure 9.1: Trends and Forecast for the North American Metal Pipe Market (2019-2035)
Figure 9.2: North American Metal Pipe Market by Material in 2019, 2026, and 2035
Figure 9.3: Trends of the North American Metal Pipe Market ($M) by Material (2019-2026)
Figure 9.4: Forecast for the North American Metal Pipe Market ($M) by Material (2027-2035)
Figure 9.5: North American Metal Pipe Market by Diameter in 2019, 2026, and 2035
Figure 9.6: Trends of the North American Metal Pipe Market ($M) by Diameter (2019-2026)
Figure 9.7: Forecast for the North American Metal Pipe Market ($M) by Diameter (2027-2035)
Figure 9.8: Trends and Forecast for the United States Metal Pipe Market ($M) (2019-2035)
Figure 9.9: Trends and Forecast for the Mexican Metal Pipe Market ($M) (2019-2035)
Figure 9.10: Trends and Forecast for the Canadian Metal Pipe Market ($M) (2019-2035)
Chapter 10
Figure 10.1: Trends and Forecast for the European Metal Pipe Market (2019-2035)
Figure 10.2: European Metal Pipe Market by Material in 2019, 2026, and 2035
Figure 10.3: Trends of the European Metal Pipe Market ($M) by Material (2019-2026)
Figure 10.4: Forecast for the European Metal Pipe Market ($M) by Material (2027-2035)
Figure 10.5: European Metal Pipe Market by Diameter in 2019, 2026, and 2035
Figure 10.6: Trends of the European Metal Pipe Market ($M) by Diameter (2019-2026)
Figure 10.7: Forecast for the European Metal Pipe Market ($M) by Diameter (2027-2035)
Figure 10.8: Trends and Forecast for the German Metal Pipe Market ($M) (2019-2035)
Figure 10.9: Trends and Forecast for the French Metal Pipe Market ($M) (2019-2035)
Figure 10.10: Trends and Forecast for the Spanish Metal Pipe Market ($M) (2019-2035)
Figure 10.11: Trends and Forecast for the Italian Metal Pipe Market ($M) (2019-2035)
Figure 10.12: Trends and Forecast for the United Kingdom Metal Pipe Market ($M) (2019-2035)
Chapter 11
Figure 11.1: Trends and Forecast for the APAC Metal Pipe Market (2019-2035)
Figure 11.2: APAC Metal Pipe Market by Material in 2019, 2026, and 2035
Figure 11.3: Trends of the APAC Metal Pipe Market ($M) by Material (2019-2026)
Figure 11.4: Forecast for the APAC Metal Pipe Market ($M) by Material (2027-2035)
Figure 11.5: APAC Metal Pipe Market by Diameter in 2019, 2026, and 2035
Figure 11.6: Trends of the APAC Metal Pipe Market ($M) by Diameter (2019-2026)
Figure 11.7: Forecast for the APAC Metal Pipe Market ($M) by Diameter (2027-2035)
Figure 11.8: Trends and Forecast for the Japanese Metal Pipe Market ($M) (2019-2035)
Figure 11.9: Trends and Forecast for the Indian Metal Pipe Market ($M) (2019-2035)
Figure 11.10: Trends and Forecast for the Chinese Metal Pipe Market ($M) (2019-2035)
Figure 11.11: Trends and Forecast for the South Korean Metal Pipe Market ($M) (2019-2035)
Figure 11.12: Trends and Forecast for the Indonesian Metal Pipe Market ($M) (2019-2035)
Chapter 12
Figure 12.1: Trends and Forecast for the ROW Metal Pipe Market (2019-2035)
Figure 12.2: ROW Metal Pipe Market by Material in 2019, 2026, and 2035
Figure 12.3: Trends of the ROW Metal Pipe Market ($M) by Material (2019-2026)
Figure 12.4: Forecast for the ROW Metal Pipe Market ($M) by Material (2027-2035)
Figure 12.5: ROW Metal Pipe Market by Diameter in 2019, 2026, and 2035
Figure 12.6: Trends of the ROW Metal Pipe Market ($M) by Diameter (2019-2026)
Figure 12.7: Forecast for the ROW Metal Pipe Market ($M) by Diameter (2027-2035)
Figure 12.8: Trends and Forecast for the Middle Eastern Metal Pipe Market ($M) (2019-2035)
Figure 12.9: Trends and Forecast for the South American Metal Pipe Market ($M) (2019-2035)
Figure 12.10: Trends and Forecast for the African Metal Pipe Market ($M) (2019-2035)
Chapter 13
Figure 13.1: Porter’s Five Forces Analysis of the Global Metal Pipe Market
Figure 13.2: Market Share (%) of Top Players in the Global Metal Pipe Market (2026)
Chapter 14
Figure 14.1: Growth Opportunities for the Global Metal Pipe Market by Material
Figure 14.2: Growth Opportunities for the Global Metal Pipe Market by Diameter
Figure 14.3: Growth Opportunities for the Global Metal Pipe Market by Pressure Rating
Figure 14.4: Growth Opportunities for the Global Metal Pipe Market by End Use
Figure 14.5: Growth Opportunities for the Global Metal Pipe Market by Region
Figure 14.6: Emerging Trends in the Global Metal Pipe Market

List of Tables

Chapter 1
Table 1.1: Growth Rate (%, 2025-2026) and CAGR (%, 2027-2035) of the Metal Pipe Market by Material, Diameter, Pressure Rating, and End Use
Table 1.2: Attractiveness Analysis for the Metal Pipe Market by Region
Table 1.3: Global Metal Pipe Market Parameters and Attributes
Chapter 3
Table 3.1: Trends of the Global Metal Pipe Market (2019-2026)
Table 3.2: Forecast for the Global Metal Pipe Market (2027-2035)
Chapter 4
Table 4.1: Attractiveness Analysis for the Global Metal Pipe Market by Material
Table 4.2: Market Size and CAGR of Various Material in the Global Metal Pipe Market (2019-2026)
Table 4.3: Market Size and CAGR of Various Material in the Global Metal Pipe Market (2027-2035)
Table 4.4: Trends of Steel Pipes in the Global Metal Pipe Market (2019-2026)
Table 4.5: Forecast for Steel Pipes in the Global Metal Pipe Market (2027-2035)
Table 4.6: Trends of Ductile Iron Pipes in the Global Metal Pipe Market (2019-2026)
Table 4.7: Forecast for Ductile Iron Pipes in the Global Metal Pipe Market (2027-2035)
Table 4.8: Trends of Copper Pipes in the Global Metal Pipe Market (2019-2026)
Table 4.9: Forecast for Copper Pipes in the Global Metal Pipe Market (2027-2035)
Table 4.10: Trends of Other Material Pipes in the Global Metal Pipe Market (2019-2026)
Table 4.11: Forecast for Other Material Pipes in the Global Metal Pipe Market (2027-2035)
Chapter 5
Table 5.1: Attractiveness Analysis for the Global Metal Pipe Market by Diameter
Table 5.2: Market Size and CAGR of Various Diameter in the Global Metal Pipe Market (2019-2026)
Table 5.3: Market Size and CAGR of Various Diameter in the Global Metal Pipe Market (2027-2035)
Table 5.4: Trends of Small Diameter Pipes in the Global Metal Pipe Market (2019-2026)
Table 5.5: Forecast for Small Diameter Pipes in the Global Metal Pipe Market (2027-2035)
Table 5.6: Trends of Large Diameter Pipes in the Global Metal Pipe Market (2019-2026)
Table 5.7: Forecast for Large Diameter Pipes in the Global Metal Pipe Market (2027-2035)
Chapter 6
Table 6.1: Attractiveness Analysis for the Global Metal Pipe Market by Pressure Rating
Table 6.2: Market Size and CAGR of Various Pressure Rating in the Global Metal Pipe Market (2019-2026)
Table 6.3: Market Size and CAGR of Various Pressure Rating in the Global Metal Pipe Market (2027-2035)
Table 6.4: Trends of Less than 300 psi Pressure Pipes in the Global Metal Pipe Market (2019-2026)
Table 6.5: Forecast for Less than 300 psi Pressure Pipes in the Global Metal Pipe Market (2027-2035)
Table 6.6: Trends of 300-1000 psi Pressure Pipes in the Global Metal Pipe Market (2019-2026)
Table 6.7: Forecast for 300-1000 psi Pressure Pipes in the Global Metal Pipe Market (2027-2035)
Table 6.8: Trends of 1000-3000 psi Pressure Pipes in the Global Metal Pipe Market (2019-2026)
Table 6.9: Forecast for 1000-3000 psi Pressure Pipes in the Global Metal Pipe Market (2027-2035)
Table 6.10: Trends of More than 3000 psi Pressure Pipes in the Global Metal Pipe Market (2019-2026)
Table 6.11: Forecast for More than 3000 psi Pressure Pipes in the Global Metal Pipe Market (2027-2035)
Chapter 7
Table 7.1: Attractiveness Analysis for the Global Metal Pipe Market by End Use
Table 7.2: Market Size and CAGR of Various End Use in the Global Metal Pipe Market (2019-2026)
Table 7.3: Market Size and CAGR of Various End Use in the Global Metal Pipe Market (2027-2035)
Table 7.4: Trends of Oil & Gas in the Global Metal Pipe Market (2019-2026)
Table 7.5: Forecast for Oil & Gas in the Global Metal Pipe Market (2027-2035)
Table 7.6: Trends of Potable Water in the Global Metal Pipe Market (2019-2026)
Table 7.7: Forecast for Potable Water in the Global Metal Pipe Market (2027-2035)
Table 7.8: Trends of Wastewater in the Global Metal Pipe Market (2019-2026)
Table 7.9: Forecast for Wastewater in the Global Metal Pipe Market (2027-2035)
Table 7.10: Trends of Power Generation in the Global Metal Pipe Market (2019-2026)
Table 7.11: Forecast for Power Generation in the Global Metal Pipe Market (2027-2035)
Table 7.12: Trends of Automotive in the Global Metal Pipe Market (2019-2026)
Table 7.13: Forecast for Automotive in the Global Metal Pipe Market (2027-2035)
Table 7.14: Trends of HVAC & Electrical in the Global Metal Pipe Market (2019-2026)
Table 7.15: Forecast for HVAC & Electrical in the Global Metal Pipe Market (2027-2035)
Table 7.16: Trends of Others in the Global Metal Pipe Market (2019-2026)
Table 7.17: Forecast for Others in the Global Metal Pipe Market (2027-2035)
Chapter 8
Table 8.1: Market Size and CAGR of Various Regions in the Global Metal Pipe Market (2019-2026)
Table 8.2: Market Size and CAGR of Various Regions in the Global Metal Pipe Market (2027-2035)
Chapter 9
Table 9.1: Trends of the North American Metal Pipe Market (2019-2026)
Table 9.2: Forecast for the North American Metal Pipe Market (2027-2035)
Table 9.3: Market Size and CAGR of Various Material in the North American Metal Pipe Market (2019-2026)
Table 9.4: Market Size and CAGR of Various Material in the North American Metal Pipe Market (2027-2035)
Table 9.5: Market Size and CAGR of Various Diameter in the North American Metal Pipe Market (2019-2026)
Table 9.6: Market Size and CAGR of Various Diameter in the North American Metal Pipe Market (2027-2035)
Table 9.7: Trends and Forecast for the United States Metal Pipe Market (2019-2035)
Table 9.8: Trends and Forecast for the Mexican Metal Pipe Market (2019-2035)
Table 9.9: Trends and Forecast for the Canadian Metal Pipe Market (2019-2035)
Chapter 10
Table 10.1: Trends of the European Metal Pipe Market (2019-2026)
Table 10.2: Forecast for the European Metal Pipe Market (2027-2035)
Table 10.3: Market Size and CAGR of Various Material in the European Metal Pipe Market (2019-2026)
Table 10.4: Market Size and CAGR of Various Material in the European Metal Pipe Market (2027-2035)
Table 10.5: Market Size and CAGR of Various Diameter in the European Metal Pipe Market (2019-2026)
Table 10.6: Market Size and CAGR of Various Diameter in the European Metal Pipe Market (2027-2035)
Table 10.7: Trends and Forecast for the German Metal Pipe Market (2019-2035)
Table 10.8: Trends and Forecast for the French Metal Pipe Market (2019-2035)
Table 10.9: Trends and Forecast for the Spanish Metal Pipe Market (2019-2035)
Table 10.10: Trends and Forecast for the Italian Metal Pipe Market (2019-2035)
Table 10.11: Trends and Forecast for the United Kingdom Metal Pipe Market (2019-2035)
Chapter 11
Table 11.1: Trends of the APAC Metal Pipe Market (2019-2026)
Table 11.2: Forecast for the APAC Metal Pipe Market (2027-2035)
Table 11.3: Market Size and CAGR of Various Material in the APAC Metal Pipe Market (2019-2026)
Table 11.4: Market Size and CAGR of Various Material in the APAC Metal Pipe Market (2027-2035)
Table 11.5: Market Size and CAGR of Various Diameter in the APAC Metal Pipe Market (2019-2026)
Table 11.6: Market Size and CAGR of Various Diameter in the APAC Metal Pipe Market (2027-2035)
Table 11.7: Trends and Forecast for the Japanese Metal Pipe Market (2019-2035)
Table 11.8: Trends and Forecast for the Indian Metal Pipe Market (2019-2035)
Table 11.9: Trends and Forecast for the Chinese Metal Pipe Market (2019-2035)
Table 11.10: Trends and Forecast for the South Korean Metal Pipe Market (2019-2035)
Table 11.11: Trends and Forecast for the Indonesian Metal Pipe Market (2019-2035)
Chapter 12
Table 12.1: Trends of the ROW Metal Pipe Market (2019-2026)
Table 12.2: Forecast for the ROW Metal Pipe Market (2027-2035)
Table 12.3: Market Size and CAGR of Various Material in the ROW Metal Pipe Market (2019-2026)
Table 12.4: Market Size and CAGR of Various Material in the ROW Metal Pipe Market (2027-2035)
Table 12.5: Market Size and CAGR of Various Diameter in the ROW Metal Pipe Market (2019-2026)
Table 12.6: Market Size and CAGR of Various Diameter in the ROW Metal Pipe Market (2027-2035)
Table 12.7: Trends and Forecast for the Middle Eastern Metal Pipe Market (2019-2035)
Table 12.8: Trends and Forecast for the South American Metal Pipe Market (2019-2035)
Table 12.9: Trends and Forecast for the African Metal Pipe Market (2019-2035)
Chapter 13
Table 13.1: Product Mapping of Metal Pipe Suppliers Based on Segments
Table 13.2: Operational Integration of Metal Pipe Manufacturers
Table 13.3: Rankings of Suppliers Based on Metal Pipe Revenue
Chapter 14
Table 14.1: New Product Launches by Major Metal Pipe Producers (2019-2026)
Table 14.2: Certification Acquired by Major Competitor in the Global Metal Pipe Market