Summary

Industrial Pipe Market

The future of the global industrial pipe market looks promising with opportunities in the power generation, petrochemical, automotive, and industrial processing markets. The global industrial pipe market is expected to reach an estimated $32.1 billion by 2035 from $27.1 billion in 2027 with a CAGR of 2.1% from 2027 to 2035. The major drivers for this market are the growing investment in water supply & sanitation infrastructure, the increasing need for replacement of old pipelines, and the rising demand for chemical industries.

• Lucintel forecasts that, within the material category, steel pipes is expected to witness higher growth over the forecast period due to the high strength and durability under extreme conditions.
• Within the end use category, industrial processing is expected to witness the highest growth over the forecast period due to the increasing industrial manufacturing and processing activities.
• In terms of regions, APAC will remain the largest region over the forecast period due to the rapid industrialization and infrastructure development expansion.

Gain valuable insights for your business decisions with our comprehensive 150+ page report. Sample figures with some insights are shown below.

Emerging Trends in Industrial Pipe Market

Between 2025 and 2027, a trend is anticipated in the industry pipe market toward utilization of materials of a lower carbon nature, application of automated (or rules-based) controls in pipe production, and pipe fabrication for extended service periods. Replacement of aging infrastructure and the Energy transition, among other things, are expected to drive the above-mentioned trends. It is expected that the pipe production industry will be required to engineer pipe systems to meet increasing design and service requirements and lesser tolerances.

• Sustainability: There is a continuing trend for pipe producers to utilize more recycled materials in pipe production, reduce the amount of resins in pipe production, and report embedded carbon in pipe. In 2025, the EU’s CBAM came into effect, and pipe producers outside the EU are also expected to report embedded carbon in pipe.
• Digital Manufacturing: The use of digital systems to model, simulate and ensure machinery is functioning properly is increasingly being utilized in pipe production. Other digitally integrated systems in pipe production and installation are expected to enable remote monitoring and diagnostics of pipe systems and welds. This, along with increasing reliance on digital systems in pipe production, is expected to facilitate reduction in rejection rates in pipe production.
• High-performance Piping Systems: HDPE, GRE, and composite piping systems are growing markets in water treatment and other process industries, including offshore. The American Water Works Association standard AWWA C906 permits the use of large diameter polyethylene (PE) pressure pipe. Further weight reduction in piping systems can increase the use of PE systems at the expense of traditional metallic piping systems.
• Supply Chain Diversification: Disruptions in international shipping have caused some users to look for new suppliers in North America, the Middle East, and Asia to reduce supply chain risk. The recently enacted U.S. Infrastructure bill ensures that pipe-related infrastructure projects will continue to reward market participants through 2026. Additional supply and local production will be required to meet pipe infrastructure project demands.
• Specialty Piping Systems: In the mid-term outlook, the need for specialized piping systems is expected to increase. The demand for piping systems that transport fluid at elevated pressure and systems to convey high temperature fluid are expected to increase. Further, the requirement for specialized piping systems in emerging industry areas such as hydrogen and carbon capture will increase. In the coming years, nominal pipeline diameter will have little or no impact on competition in the pipeline market.

The pipeline market is expected to exhibit stable growth in the long-term. Projects related to the production of potable water and the energy transition are expected to provide a stable base market for the pipeline industry. Other construction-related projects are price-sensitive and cyclical. Material and energy efficiency will be of primary concern for pipeline system producers and end-users. Carbon accountability and materials substitution will place downward pressure on producers of piping systems.

Recent Developments in the Industrial Pipe Market

Increased energy and water infrastructure projects along with CCUS and re-shoring projects should result in more awarded contracts and greater construction industry pipe market activity between 2025 and 2027. According to Lucintel, there will also be increased demand for specialty piping. Due to this increased demand, fabrication centres may shift where they locate and construct new facilities.

• Shift in Supply Focus: In January 2025, Tenaris announced a $182 million investment to add production capacity for large diameter seamless pipe at their Bay City, Texas facility. They expect the new facility will help meet the energy and industrial pipeline needs of North America and other global regions.
• Consolidation: In June 2025, Nippon Steel completed its $14.9 billion acquisition of U.S. Steel. While U.S. Steel’s pipe making operations may be integrated with Nippon Steel’s to make other, larger products, it may also help provide piping to the automotive, energy, and other industries.
• Hydrogen Piping: Germany allocated €3 billion in February 2025 for the development of Hydrogen piping. New pipeline routes may spur construction of high-strength Hydrogen piping, creating a competitive market to award contracts based on supplier experience rather than price.
• Updating Carbon-capture Systems: ExxonMobil and EnLink Midstream announced an expansion to their carbon-capture partnership in March 2025. Along with the expansion, the companies announced the addition of 1,300 miles of pipeline to their carbon-capture infrastructure. Designing and constructing a pipeline to convey carbon dioxide (or other captured substances) typically requires special considerations for the quality of the welds and fracture control, as well as prolonged monitoring and integrity of the pipeline.
• Improving Water Systems: The U.S. Environmental Protection Agency (EPA) announced in April 2025 that it would provide $3.6 billion to the Clean Water State Revolving Fund. Replacing water mains with more modern systems is expected to continue, particularly with ductile iron, steel and other plastics piping systems. Purchasing trends for water mains and other infrastructure have shifted toward systems that provide the best lifecycle cost and ease of installation.

The focus for pipe suppliers will be on project financing and service capabilities. The water and carbon dioxide piping systems projects should provide stability for suppliers in the medium-term. Achieving a balance between regular carbon reporting and product shipments should allow suppliers to retain a preferred-customer status.

Strategic Growth Opportunities in the Industrial Pipe Market

The forward looking-growth in the engineered systems segment is expected to outpace the replacement systems segment over the next several years. The combined effect of energy transition-related infrastructure investments, technical service limitations of the existing infrastructure, and stringent code and standard compliance will fuel this growth. Moving into the 2024–2026-time frame, project sponsors will award contracts to suppliers that can demonstrate an even greater service life of their products. Lucintel expects the material and design code provisions to be key areas of competitive differentiation.

• Hydrogen-ready Piping Systems: Lucintel expects that the ongoing and planned hydrogen infrastructure projects will accelerate the need for materials and systems for construction of hydrogen pipelines. Other related projects will also accelerate the need for materials and systems for construction of pipelines. The safety case will drive the shift to the specification of higher-integrity pipelines.
• Carbon Capture and Storage (CCS) Infrastructure: The pipe systems used for transport of captured CO2 in dense phase will require materials of even greater corrosion resistance. The US’s $1.8 billion funding in February 2025 will facilitate additional projects to construct inter-terminal pipelines to support storage and transport of captured CO2.
• Data Centre Cooling: Designs for closed-loop cooling systems to use industrial-scale piping for water recycling are gaining adoption. The IEA’s January 2024 report forecasted energy consumption for data centres to exceed 1,000 TWh by 2026. The increasing energy consumption for data centre operations and infrastructure provides a sustained market for the pipe, fittings, and systems for closed-loop cooling.
• Recycled-content Products: Procurement specifications by end users for recycled-material and lower-carbon-footprint steel products are increasing. For 2024, ArcelorMittal reported producing 13.6 million tons of crude steel. The scale of the steel industry provides an opportunity for transformation of steel-making processes to use different feedstocks. Pricing of pipe based on verified carbon credits is expected to increase.
• Digital Fabrication: Recent investments for clean energy and decarbonization by U.S. government agencies are expected to stimulate the market. The U.S. Department of Energy’s March 2024 awards to the industry for decarbonization totaling $6 billion, is expected to increase controlled fabrication and other processes for the market.

Continued focus on the core business of engineering and construction will provide better opportunities for margin improvements compared to pipe-only producers. Dependable and traceable fields services and support will be key for qualifying projects. Use of pipe with recycled content will become commonplace for procurement.

Industrial Pipe Market Drivers and Challenges

Industrial pipe market growth is shaped by customer demand, technological progress, infrastructure spending, sustainability objectives, manufacturing economics, and regulatory requirements. Energy transition projects, water-system upgrades, industrial expansion, and replacement needs support consumption, while volatile raw-material prices, trade restrictions, environmental compliance, and installation complexity create pressure. Lucintel highlights the importance of balancing innovation, affordability, and resilience.

The factors responsible for driving the industrial pipe market include:-

• Customer Demand: Expanding oil and gas, chemicals, power generation, construction, and water-treatment activities are increasing demand for durable piping systems. Aging pipelines also require replacement, while urbanization is creating new distribution networks. In January 2025, the International Energy Agency continued projecting strong electricity-demand growth through 2027, supporting power-generation and cooling infrastructure investments. Over the next three to five years, industrial pipe consumption will benefit from essential infrastructure expansion, industrial capacity additions, and maintenance requirements across developed and emerging economies.
• Technology Improvements: Advanced welding, corrosion-resistant alloys, multilayer composites, digital inspection, and automated manufacturing are improving pipe reliability and service life. Smart sensors and predictive-maintenance platforms help operators identify pressure losses, cracks, and leakage before failures occur. In February 2025, digital industrial systems increasingly used continuous monitoring at operating frequencies measured in real time rather than periodic manual inspections. During the next three to five years, technology adoption will encourage customers to replace conventional products with lighter, stronger, and more traceable pipe solutions that reduce downtime and lifecycle costs.
• Regulatory Support: Governments are strengthening requirements for pipeline safety, water quality, emissions control, and industrial reliability. These rules encourage the replacement of obsolete infrastructure and promote certified materials, improved testing, and better installation practices. In January 2026, the European Union’s Carbon Border Adjustment Mechanism entered its definitive phase, increasing attention to emissions associated with steel-intensive products. Over the next three to five years, compliance obligations will favor manufacturers with documented supply chains, lower-carbon production, recognized certifications, and consistent quality-control systems.
• Sustainability: Decarbonization, water conservation, recycling, and resource efficiency are expanding demand for pipes used in hydrogen, carbon capture, renewable power, wastewater treatment, and desalination. Plastic-composite and corrosion-resistant products can also reduce maintenance, leakage, and replacement requirements. In March 2025, global clean-energy investment remained above 2 trillion dollars annually according to widely cited industry estimates, supporting related infrastructure development. Over the next three to five years, sustainability targets will shift purchasing decisions toward recyclable, energy-efficient, low-emission, and longer-lasting pipe materials.
• Manufacturing Efficiency: Automated forming, precision cutting, improved coatings, additive manufacturing, and data-driven quality control are increasing production consistency while reducing waste. Larger facilities can also gain economies of scale through standardized designs and high-volume procurement. In April 2025, manufacturers continued adopting industrial robots operating across production cycles measured in 24-hour periods, improving throughput and reducing dependence on manual labor. Over the next three to five years, efficiency improvements will help suppliers manage price competition, shorten delivery times, and protect margins despite volatile steel, energy, and logistics costs.

The challenges facing this Market include:

• Raw-Material Volatility: Steel, nickel, copper, resin, energy, and transportation prices can change rapidly, creating uncertainty for manufacturers and contractors. Because raw materials represent a substantial share of total pipe cost, sudden increases can reduce margins, delay quotations, and encourage customers to postpone projects. In February 2025, global steel markets continued facing trade and supply-chain uncertainty, with prices varying significantly across regions. Over the next three to five years, companies will need diversified sourcing, stronger inventory planning, long-term contracts, and improved price-adjustment mechanisms to remain competitive.
• Trade and Supply-Chain Risks: Tariffs, sanctions, export controls, port congestion, geopolitical tensions, and regional shortages can disrupt access to specialized grades, fittings, and production equipment. Long international supply chains also increase lead times and working-capital requirements. In April 2025, tariff changes affecting steel and aluminum trade continued to influence procurement decisions across major importing markets. Over the next three to five years, buyers will increasingly prefer regional production, multiple qualified suppliers, and local inventory, potentially raising costs while improving supply security and delivery reliability.
• Installation and Compliance Complexity: Industrial pipe projects require engineering approvals, skilled labor, welding qualifications, pressure testing, coating inspection, and adherence to differing national standards. Mistakes can cause leakage, shutdowns, environmental damage, or expensive rework. In May 2025, major infrastructure projects continued reporting installation schedules extending across multiple months because of permitting, testing, and commissioning requirements. Over the next three to five years, labor shortages and increasingly demanding compliance procedures may slow project execution, although digital modeling, prefabrication, and automated inspection can reduce these constraints.

Industrial pipe market expansion will remain supported by infrastructure renewal, industrialization, energy transition projects, digital manufacturing, and sustainability requirements. Stronger regulations will encourage safer, more efficient, and lower-emission products, while technology will improve durability and lifecycle economics. However, raw-material volatility, trade uncertainty, skilled-labor shortages, and complex compliance requirements may restrict profitability and delay installations. Competitive suppliers will increasingly rely on regional sourcing, automation, advanced materials, certification, and predictive maintenance. Overall, the market should experience steady long-term development, but performance will vary by application, geography, material type, project financing, and the pace of investment in energy, water, manufacturing, and transportation infrastructure.

List of Industrial Pipe Market Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. Through these strategies industrial pipe market companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the industrial pipe market companies profiled in this report include-

• Vallourec SA
• TMK Group
• Tenaris SA
• China LESSO Group Holdings Limited
• ArcelorMittal S.A.
• Orbia
• Sekisui Chemical Co. Ltd.
• Advanced Drainage Systems, Inc.
• Saudi Arabian Amiantit Company
• Northwest Pipe Company

Industrial Pipe Market by Segment

The study includes a forecast for the global industrial pipe market by material, pressure rating, diameter, end use, and region.

Industrial Pipe Market by Material [Value ($M) from 2019 to 2035]:

• Steel Pipes
• Ductile Iron Pipes
• Plastic Pipes
• FRP Pipes
• Others

Industrial Pipe Market by Pressure Rating [Value ($M) from 2019 to 2035]:

• Low Pressure Rating
• Medium Pressure Rating
• High Pressure Rating

Industrial Pipe Market by Diameter [Value ($M) from 2019 to 2035]:

• Small Diameter Pipes
• Medium Diameter Pipes
• Large Diameter Pipes

Industrial Pipe Market by End Use [Value ($M) from 2019 to 2035]:

• Power Generation
• Petrochemical
• Automotive
• Industrial Processing
• Others

Industrial Pipe Market by Region [Value ($M) from 2019 to 2035]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the Industrial Pipe Market

Investments in decarbonization, infrastructure and onshoring of supply chains have created new trends in the market for industrial pipes. Through 2027, the steel industry is expected to launch new, lower emission, steel making facilities. Government initiatives to support hydrogen, carbon capture and storage and other energy infrastructure projects are also expected to create new markets. Recently, Lucintel reviewed these projects and assessed their impact on various markets.

• United States: In January 2025, the US Department of Energy awarded $1.6 billion to 93 projects to build energy infrastructure. Pipe demand is expected from transmission and other infrastructure projects. Tenaris is also expanding its pipe-making facility in Bay City, Texas.
• China: In 2025, Baosteel is expected to spend about RMB 5.4 billion to build a third Blast Furnace at its Zhanjiang Steel Complex. The new facility will expand China’s production of steel used to manufacture pipes and other products in the mechanical, energy and other industries.
• Germany: Salzgitter’s SALCOS program expects to spend €2.3 billion to build integrated direct reduced iron and electric-steelmaking facilities. Commercial operation is expected to begin in 2026. Expected supply of low carbon flat and specialty steels will influence pipe making industry’s raw material procurement and compliance strategies in the next 3-5 years.
• India: Tata Steel’s May 2023 commissioning of 5 million tonnes per year of crude steel at Kalinga Nagar, Odisha, takes the location’s total to 8 million tonnes. The expanded facility should increase the production of crude steel for expanded domestic welded and other pipes, thereby reducing the reliance on imported steel.
• Japan: JFE Steel’s February 2023 announcement to spend ¥190 billion to modernize its Kurashiki Works will enhance the production of special steels. The project is expected to improve Japan’s competitiveness in supplying a range of Steels for the piping industry.

Features of the Global Industrial Pipe Market
Market Size Estimates: industrial pipe market size estimation in terms of value ($M).
Trend and Forecast Analysis: Market trends (2019 to 2026) and forecast (2027 to 2035) by various segments and regions.
Segmentation Analysis: industrial pipe market size by various segments, such as by material, pressure rating, diameter, end use, and region in terms of value ($M).
Regional Analysis: industrial pipe market breakdown by North America, Europe, Asia Pacific, and Rest of the World.
Growth Opportunities: Analysis of growth opportunities in different material, pressure rating, diameter, end use, and regions for the industrial pipe market.
Strategic Analysis: This includes M&A, new product development, and competitive landscape of the industrial pipe market.
Analysis of competitive intensity of the industry based on Porter’s Five Forces model.

If you are looking to expand your business in this or adjacent markets, then contact us. We have done hundreds of strategic consulting projects in market entry, opportunity screening, due diligence, supply chain analysis, M & A, and more.

This report answers following 11 key questions:
Q.1. What are some of the most promising, high-growth opportunities for the industrial pipe market by material (steel pipes, ductile iron pipes, plastic pipes, FRP pipes, and others), pressure rating (low pressure rating, medium pressure rating, and high pressure rating), diameter (small diameter pipes, medium diameter pipes, and large diameter pipes), end use (power generation, petrochemical, automotive, industrial processing, and others), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
Q.2. Which segments will grow at a faster pace and why?
Q.3. Which region will grow at a faster pace and why?
Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
Q.5. What are the business risks and competitive threats in this market?
Q.6. What are the emerging trends in this market and the reasons behind them?
Q.7. What are some of the changing demands of customers in the market?
Q.8. What are the new developments in the market? Which companies are leading these developments?
Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?

ページTOPに戻る

Table of Contents

Table of Contents

1. Executive Summary
2. Market Overview
2.1 Background and Classifications
2.2 Supply Chain
3. Market Trends & Forecast Analysis
3.1 Macroeconomic Trends and Forecasts
3.2 Industry Drivers and Challenges
3.3 PESTLE Analysis
3.4 Patent Analysis
3.5 Regulatory Environment
3.6 Global Industrial Pipe Market Trends and Forecast
4. Global Industrial Pipe Market by Material
4.1 Overview
4.2 Attractiveness Analysis by Material
4.3 Steel Pipes : Trends and Forecast (2019 to 2035)
4.4 Ductile Iron Pipes : Trends and Forecast (2019 to 2035)
4.5 Plastic Pipes : Trends and Forecast (2019 to 2035)
4.6 FRP Pipes : Trends and Forecast (2019 to 2035)
4.7 Others : Trends and Forecast (2019 to 2035)
5. Global Industrial Pipe Market by Pressure Rating
5.1 Overview
5.2 Attractiveness Analysis by Pressure Rating
5.3 Low Pressure Rating : Trends and Forecast (2019 to 2035)
5.4 Medium Pressure Rating : Trends and Forecast (2019 to 2035)
5.5 High Pressure Rating : Trends and Forecast (2019 to 2035)
6. Global Industrial Pipe Market by Diameter
6.1 Overview
6.2 Attractiveness Analysis by Diameter
6.3 Small Diameter Pipes : Trends and Forecast (2019 to 2035)
6.4 Medium Diameter Pipes : Trends and Forecast (2019 to 2035)
6.5 Large Diameter Pipes : Trends and Forecast (2019 to 2035)
7. Global Industrial Pipe Market by End Use
7.1 Overview
7.2 Attractiveness Analysis by End Use
7.3 Power Generation : Trends and Forecast (2019 to 2035)
7.4 Petrochemical : Trends and Forecast (2019 to 2035)
7.5 Automotive : Trends and Forecast (2019 to 2035)
7.6 Industrial Processing : Trends and Forecast (2019 to 2035)
7.7 Others : Trends and Forecast (2019 to 2035)
8. Regional Analysis
8.1 Overview
8.2 Global Industrial Pipe Market by Region
9. North American Industrial Pipe Market
9.1 Overview
9.2 North American Industrial Pipe Market by Material
9.3 North American Industrial Pipe Market by End Use
9.4 The United States Industrial Pipe Market
9.5 Canadian Industrial Pipe Market
9.6 Mexican Industrial Pipe Market
10. European Industrial Pipe Market
10.1 Overview
10.2 European Industrial Pipe Market by Material
10.3 European Industrial Pipe Market by End Use
10.4 German Industrial Pipe Market
10.5 French Industrial Pipe Market
10.6 Italian Industrial Pipe Market
10.7 Spanish Industrial Pipe Market
10.8 The United Kingdom Industrial Pipe Market
11. APAC Industrial Pipe Market
11.1 Overview
11.2 APAC Industrial Pipe Market by Material
11.3 APAC Industrial Pipe Market by End Use
11.4 Chinese Industrial Pipe Market
11.5 Indian Industrial Pipe Market
11.6 Japanese Industrial Pipe Market
11.7 South Korean Industrial Pipe Market
11.8 Indonesian Industrial Pipe Market
12. ROW Industrial Pipe Market
12.1 Overview
12.2 ROW Industrial Pipe Market by Material
12.3 ROW Industrial Pipe Market by End Use
12.4 Middle Eastern Industrial Pipe Market
12.5 South American Industrial Pipe Market
12.6 African Industrial Pipe Market
13. Competitor Analysis
13.1 Product Portfolio Analysis
13.2 Operational Integration
13.3 Porter’s Five Forces Analysis
• Competitive Rivalry
• Bargaining Power of Buyers
• Bargaining Power of Suppliers
• Threat of Substitutes
• Threat of New Entrants
13.4 Market Share Analysis
14. Opportunities & Strategic Analysis
14.1 Value Chain Analysis
14.2 Growth Opportunity Analysis
14.2.1 Growth Opportunity by Material
14.2.2 Growth Opportunity by Pressure Rating
14.2.3 Growth Opportunity by Diameter
14.2.4 Growth Opportunity by End Use
14.2.5 Growth Opportunity by Region
14.3 Emerging Trends in the Global Industrial Pipe Market
14.4 Strategic Analysis
14.4.1 New Product Development
14.4.2 Certification and Licensing
14.4.3 Mergers, Acquisitions, Agreements, Collaborations, and Joint Ventures
15. Company Profiles of the Leading Players Across the Value Chain
15.1 Competitive Analysis Overview
15.2 Vallourec SA
• Company Overview
• Industrial Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
15.3 TMK Group
• Company Overview
• Industrial Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
15.4 Tenaris SA
• Company Overview
• Industrial Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
15.5 China LESSO Group Holdings Limited
• Company Overview
• Industrial Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
15.6 ArcelorMittal S.A.
• Company Overview
• Industrial Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
15.7 Orbia
• Company Overview
• Industrial Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
15.8 Sekisui Chemical Co. Ltd.
• Company Overview
• Industrial Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
15.9 Advanced Drainage Systems, Inc.
• Company Overview
• Industrial Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
15.10 Saudi Arabian Amiantit Company
• Company Overview
• Industrial Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
15.11 Northwest Pipe Company
• Company Overview
• Industrial Pipe Market Business Overview
• New Product Development
• Merger, Acquisition, and Collaboration
• Certification and Licensing
16. Appendix
16.1 List of Figures
16.2 List of Tables
16.3 Research Methodology
16.4 Disclaimer
16.5 Copyright
16.6 Abbreviations and Technical Units
16.7 About Us
16.8 Contact Us

ページTOPに戻る

List of Tables/Graphs

List of Figures

Chapter 1
Figure 1.1: Trends and Forecast for the Global Industrial Pipe Market
Chapter 2
Figure 2.1: Usage of Industrial Pipe Market
Figure 2.2: Classification of the Global Industrial Pipe Market
Figure 2.3: Supply Chain of the Global Industrial Pipe Market
Chapter 3
Figure 3.1: Trends of the Global GDP Growth Rate
Figure 3.2: Trends of the Global Population Growth Rate
Figure 3.3: Trends of the Global Inflation Rate
Figure 3.4: Trends of the Global Unemployment Rate
Figure 3.5: Trends of the Regional GDP Growth Rate
Figure 3.6: Trends of the Regional Population Growth Rate
Figure 3.7: Trends of the Regional Inflation Rate
Figure 3.8: Trends of the Regional Unemployment Rate
Figure 3.9: Trends of Regional Per Capita Income
Figure 3.10: Forecast for the Global GDP Growth Rate
Figure 3.11: Forecast for the Global Population Growth Rate
Figure 3.12: Forecast for the Global Inflation Rate
Figure 3.13: Forecast for the Global Unemployment Rate
Figure 3.14: Forecast for the Regional GDP Growth Rate
Figure 3.15: Forecast for the Regional Population Growth Rate
Figure 3.16: Forecast for the Regional Inflation Rate
Figure 3.17: Forecast for the Regional Unemployment Rate
Figure 3.18: Forecast for Regional Per Capita Income
Figure 3.19: Driver and Challenges of the Industrial Pipe Market
Chapter 4
Figure 4.1: Global Industrial Pipe Market by Material in 2019, 2026, and 2035
Figure 4.2: Trends of the Global Industrial Pipe Market ($M) by Material
Figure 4.3: Forecast for the Global Industrial Pipe Market ($M) by Material
Figure 4.4: Trends and Forecast for Steel Pipes in the Global Industrial Pipe Market (2019-2035)
Figure 4.5: Trends and Forecast for Ductile Iron Pipes in the Global Industrial Pipe Market (2019-2035)
Figure 4.6: Trends and Forecast for Plastic Pipes in the Global Industrial Pipe Market (2019-2035)
Figure 4.7: Trends and Forecast for FRP Pipes in the Global Industrial Pipe Market (2019-2035)
Figure 4.8: Trends and Forecast for Others in the Global Industrial Pipe Market (2019-2035)
Chapter 5
Figure 5.1: Global Industrial Pipe Market by Pressure Rating in 2019, 2026, and 2035
Figure 5.2: Trends of the Global Industrial Pipe Market ($M) by Pressure Rating
Figure 5.3: Forecast for the Global Industrial Pipe Market ($M) by Pressure Rating
Figure 5.4: Trends and Forecast for Low Pressure Rating in the Global Industrial Pipe Market (2019-2035)
Figure 5.5: Trends and Forecast for Medium Pressure Rating in the Global Industrial Pipe Market (2019-2035)
Figure 5.6: Trends and Forecast for High Pressure Rating in the Global Industrial Pipe Market (2019-2035)
Chapter 6
Figure 6.1: Global Industrial Pipe Market by Diameter in 2019, 2026, and 2035
Figure 6.2: Trends of the Global Industrial Pipe Market ($M) by Diameter
Figure 6.3: Forecast for the Global Industrial Pipe Market ($M) by Diameter
Figure 6.4: Trends and Forecast for Small Diameter Pipes in the Global Industrial Pipe Market (2019-2035)
Figure 6.5: Trends and Forecast for Medium Diameter Pipes in the Global Industrial Pipe Market (2019-2035)
Figure 6.6: Trends and Forecast for Large Diameter Pipes in the Global Industrial Pipe Market (2019-2035)
Chapter 7
Figure 7.1: Global Industrial Pipe Market by End Use in 2019, 2026, and 2035
Figure 7.2: Trends of the Global Industrial Pipe Market ($M) by End Use
Figure 7.3: Forecast for the Global Industrial Pipe Market ($M) by End Use
Figure 7.4: Trends and Forecast for Power Generation in the Global Industrial Pipe Market (2019-2035)
Figure 7.5: Trends and Forecast for Petrochemical in the Global Industrial Pipe Market (2019-2035)
Figure 7.6: Trends and Forecast for Automotive in the Global Industrial Pipe Market (2019-2035)
Figure 7.7: Trends and Forecast for Industrial Processing in the Global Industrial Pipe Market (2019-2035)
Figure 7.8: Trends and Forecast for Others in the Global Industrial Pipe Market (2019-2035)
Chapter 8
Figure 8.1: Trends of the Global Industrial Pipe Market ($M) by Region (2019-2026)
Figure 8.2: Forecast for the Global Industrial Pipe Market ($M) by Region (2027-2035)
Chapter 9
Figure 9.1: Trends and Forecast for the North American Industrial Pipe Market (2019-2035)
Figure 9.2: North American Industrial Pipe Market by Material in 2019, 2026, and 2035
Figure 9.3: Trends of the North American Industrial Pipe Market ($M) by Material (2019-2026)
Figure 9.4: Forecast for the North American Industrial Pipe Market ($M) by Material (2027-2035)
Figure 9.5: North American Industrial Pipe Market by Pressure Rating in 2019, 2026, and 2035
Figure 9.6: Trends of the North American Industrial Pipe Market ($M) by Pressure Rating (2019-2026)
Figure 9.7: Forecast for the North American Industrial Pipe Market ($M) by Pressure Rating (2027-2035)
Figure 9.8: Trends and Forecast for the United States Industrial Pipe Market ($M) (2019-2035)
Figure 9.9: Trends and Forecast for the Mexican Industrial Pipe Market ($M) (2019-2035)
Figure 9.10: Trends and Forecast for the Canadian Industrial Pipe Market ($M) (2019-2035)
Chapter 10
Figure 10.1: Trends and Forecast for the European Industrial Pipe Market (2019-2035)
Figure 10.2: European Industrial Pipe Market by Material in 2019, 2026, and 2035
Figure 10.3: Trends of the European Industrial Pipe Market ($M) by Material (2019-2026)
Figure 10.4: Forecast for the European Industrial Pipe Market ($M) by Material (2027-2035)
Figure 10.5: European Industrial Pipe Market by Pressure Rating in 2019, 2026, and 2035
Figure 10.6: Trends of the European Industrial Pipe Market ($M) by Pressure Rating (2019-2026)
Figure 10.7: Forecast for the European Industrial Pipe Market ($M) by Pressure Rating (2027-2035)
Figure 10.8: Trends and Forecast for the German Industrial Pipe Market ($M) (2019-2035)
Figure 10.9: Trends and Forecast for the French Industrial Pipe Market ($M) (2019-2035)
Figure 10.10: Trends and Forecast for the Spanish Industrial Pipe Market ($M) (2019-2035)
Figure 10.11: Trends and Forecast for the Italian Industrial Pipe Market ($M) (2019-2035)
Figure 10.12: Trends and Forecast for the United Kingdom Industrial Pipe Market ($M) (2019-2035)
Chapter 11
Figure 11.1: Trends and Forecast for the APAC Industrial Pipe Market (2019-2035)
Figure 11.2: APAC Industrial Pipe Market by Material in 2019, 2026, and 2035
Figure 11.3: Trends of the APAC Industrial Pipe Market ($M) by Material (2019-2026)
Figure 11.4: Forecast for the APAC Industrial Pipe Market ($M) by Material (2027-2035)
Figure 11.5: APAC Industrial Pipe Market by Pressure Rating in 2019, 2026, and 2035
Figure 11.6: Trends of the APAC Industrial Pipe Market ($M) by Pressure Rating (2019-2026)
Figure 11.7: Forecast for the APAC Industrial Pipe Market ($M) by Pressure Rating (2027-2035)
Figure 11.8: Trends and Forecast for the Japanese Industrial Pipe Market ($M) (2019-2035)
Figure 11.9: Trends and Forecast for the Indian Industrial Pipe Market ($M) (2019-2035)
Figure 11.10: Trends and Forecast for the Chinese Industrial Pipe Market ($M) (2019-2035)
Figure 11.11: Trends and Forecast for the South Korean Industrial Pipe Market ($M) (2019-2035)
Figure 11.12: Trends and Forecast for the Indonesian Industrial Pipe Market ($M) (2019-2035)
Chapter 12
Figure 12.1: Trends and Forecast for the ROW Industrial Pipe Market (2019-2035)
Figure 12.2: ROW Industrial Pipe Market by Material in 2019, 2026, and 2035
Figure 12.3: Trends of the ROW Industrial Pipe Market ($M) by Material (2019-2026)
Figure 12.4: Forecast for the ROW Industrial Pipe Market ($M) by Material (2027-2035)
Figure 12.5: ROW Industrial Pipe Market by Pressure Rating in 2019, 2026, and 2035
Figure 12.6: Trends of the ROW Industrial Pipe Market ($M) by Pressure Rating (2019-2026)
Figure 12.7: Forecast for the ROW Industrial Pipe Market ($M) by Pressure Rating (2027-2035)
Figure 12.8: Trends and Forecast for the Middle Eastern Industrial Pipe Market ($M) (2019-2035)
Figure 12.9: Trends and Forecast for the South American Industrial Pipe Market ($M) (2019-2035)
Figure 12.10: Trends and Forecast for the African Industrial Pipe Market ($M) (2019-2035)
Chapter 13
Figure 13.1: Porter’s Five Forces Analysis of the Global Industrial Pipe Market
Figure 13.2: Market Share (%) of Top Players in the Global Industrial Pipe Market (2025)
Chapter 14
Figure 14.1: Growth Opportunities for the Global Industrial Pipe Market by Material
Figure 14.2: Growth Opportunities for the Global Industrial Pipe Market by Pressure Rating
Figure 14.3: Growth Opportunities for the Global Industrial Pipe Market by Diameter
Figure 14.4: Growth Opportunities for the Global Industrial Pipe Market by End Use
Figure 14.5: Growth Opportunities for the Global Industrial Pipe Market by Region
Figure 14.6: Emerging Trends in the Global Industrial Pipe Market

List of Tables

Chapter 1
Table 1.1: Growth Rate (%, 2025-2026) and CAGR (%, 2027-2035) of the Industrial Pipe Market by Material, Pressure Rating, Diameter, and End Use
Table 1.2: Attractiveness Analysis for the Industrial Pipe Market by Region
Table 1.3: Global Industrial Pipe Market Parameters and Attributes
Chapter 3
Table 3.1: Trends of the Global Industrial Pipe Market (2019-2026)
Table 3.2: Forecast for the Global Industrial Pipe Market (2027-2035)
Chapter 4
Table 4.1: Attractiveness Analysis for the Global Industrial Pipe Market by Material
Table 4.2: Market Size and CAGR of Various Material in the Global Industrial Pipe Market (2019-2026)
Table 4.3: Market Size and CAGR of Various Material in the Global Industrial Pipe Market (2027-2035)
Table 4.4: Trends of Steel Pipes in the Global Industrial Pipe Market (2019-2026)
Table 4.5: Forecast for Steel Pipes in the Global Industrial Pipe Market (2027-2035)
Table 4.6: Trends of Ductile Iron Pipes in the Global Industrial Pipe Market (2019-2026)
Table 4.7: Forecast for Ductile Iron Pipes in the Global Industrial Pipe Market (2027-2035)
Table 4.8: Trends of Plastic Pipes in the Global Industrial Pipe Market (2019-2026)
Table 4.9: Forecast for Plastic Pipes in the Global Industrial Pipe Market (2027-2035)
Table 4.10: Trends of FRP Pipes in the Global Industrial Pipe Market (2019-2026)
Table 4.11: Forecast for FRP Pipes in the Global Industrial Pipe Market (2027-2035)
Table 4.12: Trends of Others in the Global Industrial Pipe Market (2019-2026)
Table 4.13: Forecast for Others in the Global Industrial Pipe Market (2027-2035)
Chapter 5
Table 5.1: Attractiveness Analysis for the Global Industrial Pipe Market by Pressure Rating
Table 5.2: Market Size and CAGR of Various Pressure Rating in the Global Industrial Pipe Market (2019-2026)
Table 5.3: Market Size and CAGR of Various Pressure Rating in the Global Industrial Pipe Market (2027-2035)
Table 5.4: Trends of Low Pressure Rating in the Global Industrial Pipe Market (2019-2026)
Table 5.5: Forecast for Low Pressure Rating in the Global Industrial Pipe Market (2027-2035)
Table 5.6: Trends of Medium Pressure Rating in the Global Industrial Pipe Market (2019-2026)
Table 5.7: Forecast for Medium Pressure Rating in the Global Industrial Pipe Market (2027-2035)
Table 5.8: Trends of High Pressure Rating in the Global Industrial Pipe Market (2019-2026)
Table 5.9: Forecast for High Pressure Rating in the Global Industrial Pipe Market (2027-2035)
Chapter 6
Table 6.1: Attractiveness Analysis for the Global Industrial Pipe Market by Diameter
Table 6.2: Market Size and CAGR of Various Diameter in the Global Industrial Pipe Market (2019-2026)
Table 6.3: Market Size and CAGR of Various Diameter in the Global Industrial Pipe Market (2027-2035)
Table 6.4: Trends of Small Diameter Pipes in the Global Industrial Pipe Market (2019-2026)
Table 6.5: Forecast for Small Diameter Pipes in the Global Industrial Pipe Market (2027-2035)
Table 6.6: Trends of Medium Diameter Pipes in the Global Industrial Pipe Market (2019-2026)
Table 6.7: Forecast for Medium Diameter Pipes in the Global Industrial Pipe Market (2027-2035)
Table 6.8: Trends of Large Diameter Pipes in the Global Industrial Pipe Market (2019-2026)
Table 6.9: Forecast for Large Diameter Pipes in the Global Industrial Pipe Market (2027-2035)
Chapter 7
Table 7.1: Attractiveness Analysis for the Global Industrial Pipe Market by End Use
Table 7.2: Market Size and CAGR of Various End Use in the Global Industrial Pipe Market (2019-2026)
Table 7.3: Market Size and CAGR of Various End Use in the Global Industrial Pipe Market (2027-2035)
Table 7.4: Trends of Power Generation in the Global Industrial Pipe Market (2019-2026)
Table 7.5: Forecast for Power Generation in the Global Industrial Pipe Market (2027-2035)
Table 7.6: Trends of Petrochemical in the Global Industrial Pipe Market (2019-2026)
Table 7.7: Forecast for Petrochemical in the Global Industrial Pipe Market (2027-2035)
Table 7.8: Trends of Automotive in the Global Industrial Pipe Market (2019-2026)
Table 7.9: Forecast for Automotive in the Global Industrial Pipe Market (2027-2035)
Table 7.10: Trends of Industrial Processing in the Global Industrial Pipe Market (2019-2026)
Table 7.11: Forecast for Industrial Processing in the Global Industrial Pipe Market (2027-2035)
Table 7.12: Trends of Others in the Global Industrial Pipe Market (2019-2026)
Table 7.13: Forecast for Others in the Global Industrial Pipe Market (2027-2035)
Chapter 8
Table 8.1: Market Size and CAGR of Various Regions in the Global Industrial Pipe Market (2019-2026)
Table 8.2: Market Size and CAGR of Various Regions in the Global Industrial Pipe Market (2027-2035)
Chapter 9
Table 9.1: Trends of the North American Industrial Pipe Market (2019-2026)
Table 9.2: Forecast for the North American Industrial Pipe Market (2027-2035)
Table 9.3: Market Size and CAGR of Various Material in the North American Industrial Pipe Market (2019-2026)
Table 9.4: Market Size and CAGR of Various Material in the North American Industrial Pipe Market (2027-2035)
Table 9.5: Market Size and CAGR of Various Pressure Rating in the North American Industrial Pipe Market (2019-2026)
Table 9.6: Market Size and CAGR of Various Pressure Rating in the North American Industrial Pipe Market (2027-2035)
Table 9.7: Trends and Forecast for the United States Industrial Pipe Market (2019-2035)
Table 9.8: Trends and Forecast for the Mexican Industrial Pipe Market (2019-2035)
Table 9.9: Trends and Forecast for the Canadian Industrial Pipe Market (2019-2035)
Chapter 10
Table 10.1: Trends of the European Industrial Pipe Market (2019-2026)
Table 10.2: Forecast for the European Industrial Pipe Market (2027-2035)
Table 10.3: Market Size and CAGR of Various Material in the European Industrial Pipe Market (2019-2026)
Table 10.4: Market Size and CAGR of Various Material in the European Industrial Pipe Market (2027-2035)
Table 10.5: Market Size and CAGR of Various Pressure Rating in the European Industrial Pipe Market (2019-2026)
Table 10.6: Market Size and CAGR of Various Pressure Rating in the European Industrial Pipe Market (2027-2035)
Table 10.7: Trends and Forecast for the German Industrial Pipe Market (2019-2035)
Table 10.8: Trends and Forecast for the French Industrial Pipe Market (2019-2035)
Table 10.9: Trends and Forecast for the Spanish Industrial Pipe Market (2019-2035)
Table 10.10: Trends and Forecast for the Italian Industrial Pipe Market (2019-2035)
Table 10.11: Trends and Forecast for the United Kingdom Industrial Pipe Market (2019-2035)
Chapter 11
Table 11.1: Trends of the APAC Industrial Pipe Market (2019-2026)
Table 11.2: Forecast for the APAC Industrial Pipe Market (2027-2035)
Table 11.3: Market Size and CAGR of Various Material in the APAC Industrial Pipe Market (2019-2026)
Table 11.4: Market Size and CAGR of Various Material in the APAC Industrial Pipe Market (2027-2035)
Table 11.5: Market Size and CAGR of Various Pressure Rating in the APAC Industrial Pipe Market (2019-2026)
Table 11.6: Market Size and CAGR of Various Pressure Rating in the APAC Industrial Pipe Market (2027-2035)
Table 11.7: Trends and Forecast for the Japanese Industrial Pipe Market (2019-2035)
Table 11.8: Trends and Forecast for the Indian Industrial Pipe Market (2019-2035)
Table 11.9: Trends and Forecast for the Chinese Industrial Pipe Market (2019-2035)
Table 11.10: Trends and Forecast for the South Korean Industrial Pipe Market (2019-2035)
Table 11.11: Trends and Forecast for the Indonesian Industrial Pipe Market (2019-2035)
Chapter 12
Table 12.1: Trends of the ROW Industrial Pipe Market (2019-2026)
Table 12.2: Forecast for the ROW Industrial Pipe Market (2027-2035)
Table 12.3: Market Size and CAGR of Various Material in the ROW Industrial Pipe Market (2019-2026)
Table 12.4: Market Size and CAGR of Various Material in the ROW Industrial Pipe Market (2027-2035)
Table 12.5: Market Size and CAGR of Various Pressure Rating in the ROW Industrial Pipe Market (2019-2026)
Table 12.6: Market Size and CAGR of Various Pressure Rating in the ROW Industrial Pipe Market (2027-2035)
Table 12.7: Trends and Forecast for the Middle Eastern Industrial Pipe Market (2019-2035)
Table 12.8: Trends and Forecast for the South American Industrial Pipe Market (2019-2035)
Table 12.9: Trends and Forecast for the African Industrial Pipe Market (2019-2035)
Chapter 13
Table 13.1: Product Mapping of Industrial Pipe Suppliers Based on Segments
Table 13.2: Operational Integration of Industrial Pipe Manufacturers
Table 13.3: Rankings of Suppliers Based on Industrial Pipe Revenue
Chapter 14
Table 14.1: New Product Launches by Major Industrial Pipe Producers (2019-2026)
Table 14.2: Certification Acquired by Major Competitor in the Global Industrial Pipe Market