Summary

The global humanoid robot bearings market is at a very early but extremely fast-accelerating stage. In value terms, the market expanded from around US$0.62 million in 2021 to about US$33.80 million in 2025, and is projected to reach roughly US$871.69 million by 2032. This implies an average annual growth rate of over 170% during 2021–2025, a sharp step-up in 2025–2026 as large pilot fleets are launched, and a still-very-high CAGR of about 46.6% in 2026–2032 as humanoid robots ramp from demonstrators to scaled deployment. Pricing trends at the joint level show that average selling prices (ASPs) per humanoid robot bearing fall from roughly US$30 per unit in 2021 to about US$18 in 2025 and US$12–13 by 2032, indicating that revenue growth is driven primarily by explosive unit-volume expansion and progressive standardisation rather than price inflation.
From a product-type perspective, the market is segmented into deep groove ball bearings, four-point contact bearings, angular contact bearings, crossed-roller bearings, flexible bearings (for example flexspline bearings in harmonic drives), and other bearings. In 2025, deep groove and crossed-roller bearings together account for just over half of global revenue, while flexible bearings remain a smaller but rapidly scaling niche. By 2032, the mix shifts markedly: flexible bearings are expected to contribute roughly one-third of total market value, with crossed-roller bearings at just above 20%, and deep-groove and angular-contact bearings together falling below one-third. This reflects the increasing penetration of strain-wave and other compact, high-ratio drive systems in humanoid joints, as well as the central role of large-diameter crossed-roller rings in hips, knees, shoulders and integrated joint modules.
Viewed through the lens of humanoid robot structure, bearings serving legs and arms form the core of market demand. In 2025, leg joints account for around 40–45% of humanoid robot bearing revenue, with arm joints contributing roughly a quarter; neck, waist and “other” structural positions together remain below 20%. By 2032, leg and arm bearings still dominate, but the dexterous hand category becomes a major growth engine: its revenue share roughly doubles from the low-teens in 2025 to about one-fifth of the total market by 2032, supported by the proliferation of multi-fingered end-effectors and higher joint counts per humanoid. This structural view underlines that most of the value pool is tied to high-load locomotion joints and high-DOF manipulation joints.
Geographically, the humanoid robot bearings market is highly asymmetric. In 2025, Asia-Pacific already contributes more than 90% of global sales value, or about US$30.86 million out of US$33.80 million, driven primarily by China’s rapid build-out of humanoid robot platforms, joint modules and robot-grade bearing capacity. North America and Europe together represent less than 10% at this stage. Looking ahead to 2032, regional revenue is forecast to reach about US$598.48 million in Asia-Pacific, US$134.91 million in North America, US$105.37 million in Europe, with Latin America and the Middle East & Africa growing from a very small base. Asia-Pacific’s share is expected to normalise from above 90% to roughly 70%, while North America and Europe collectively approach 30%, reflecting the spread of humanoid applications and supply capacity from China to other major industrial regions.
At the level of joint application, the report identifies linear joints, rotational joints, dexterous hand joints and other joints as distinct ASP and value buckets. Rotational joints represent the largest and most technically demanding category, requiring bearings that combine radial, axial and moment-load capacity in compact envelopes and are often integrated directly into high-ratio gearheads. Linear joints typically rely on recirculating ball guides or similar components and remain a minority share of total unit volume but are strategically important for certain tasks and underactuated mechanisms. Dexterous hand joints emphasise miniaturisation, low friction torque and tight torque dispersion, as they directly determine manipulators’ precision and haptic behaviour. Overall, joint-level ASPs trend steadily downward across all categories through 2032, with rotational joints retaining the highest absolute price level and “other joints” showing the largest ASP compression as volumes scale.
On the supply-side, humanoid robot bearings are emerging as a premium niche within the broader bearing industry. The value chain requires integrated control of metallurgy, heat treatment, precision grinding, super-finishing, metrology, contamination control and life testing, coupled with application-specific engineering for backdrivability, stiffness, noise and safety.
Capacity is ramping from negligible levels in 2021 to sizeable volumes by 2026, with a number of companies planning tens of millions of units of annual capacity across thin-wall, flexible and crossed-roller families.
Japan, Europe and China lead in high-precision capability, with China building dense clusters in Zhejiang, Shanghai, Henan, Shandong and Fujian as major global bases for robot-grade bearings and joint modules.
Profitability is currently attractive: humanoid-grade bearings typically exhibit gross margins in the high-20% to mid-30% range for global majors and precision specialists, and up to the 40–50% range for some focused Chinese humanoid platforms during the initial scale-up window.
However, the market also faces material, capacity and regulatory constraints. Volatility in high-grade bearing steel pricing, shared use of precision manufacturing assets across multiple high-end bearing segments, and geographic concentration of advanced bearing and actuator capabilities all create supply-chain risks for humanoid programs. On the economic side, high R&D and manufacturing costs for humanoid systems exert strong cost-down pressure on key components, while early generations of humanoid bearings still involve customised, low-volume designs that limit economies of scale. Evolving safety standards and prospective humanoid-specific norms will raise documentation, traceability and qualification requirements for bearings used in safety-critical joints.
Overall, the report concludes that humanoid robot bearings will evolve from a tiny, project-driven niche into a large, structurally growing component market over 2026–2032. Value creation will concentrate in bearings and integrated joint modules that directly enable dynamic bipedal locomotion, high-DOF manipulation and long-life, low-noise service operation, while more generic positions gradually commoditise. For bearing manufacturers, success will depend on early co-design with humanoid OEMs and joint-module suppliers, disciplined capacity ramp-up, and careful navigation of cost, qualification and safety requirements along the path from prototypes to mass deployment.
This report provides a comprehensive view of the global market for Humanoid Robot Bearings, covering total sales volume, sales revenue, pricing, the market share and ranking of key companies, along with analyses by region & country, by Type, and by Application.
The Humanoid Robot Bearings market size, estimations, and forecasts are presented in terms of sales volume (Kilo Units) and revenue ($ millions), with 2025 as the base year and historical and forecast data from 2021 to 2032. The report combines quantitative and qualitative analysis to help readers develop growth strategies, assess the competitive landscape, evaluate their position in the current marketplace, and make informed business decisions regarding Humanoid Robot Bearings.
Market Segmentation
By Company
 Luoyang Hongyuan (HONB)
 THK
 Nippon Thompson (IKO)
 SKF
 Changzhou NRB
 NSK
 Haina Renhe
 Shandong Bote
 Ningbo Shilong (RCL)
 Schaeffler
 Cixing Group
 CCTY
 Timken
 Wanxiang Qianchao
 Nachi-Fujikoshi
 HIWIN
 Luoyang Xinkai
 XCC Group
 JTEKT
 Kitanihon Seiki
 Changsheng Bearings (CSB)
 MinebeaMitsumi
 C&U
 Zhejiang Qisheng
 Tiejin Technology (STT)
 LS Bearings
 Shanghai SXD

Segment by Type
 Deep Groove Ball Bearing
 Four Point Contact Bearings
 Angular Contact Bearing
 Crossed Roller Bearing
 Flexible Bearings
 Other Bearings

Segment by Application
 High-priced Humanoid Robots
 Low-priced Humanoid Robots

Segment by Humanoid Robot Structure
 Neck
 Waist
 Arm
 Leg
 Dexterous Hand
 Other

Segment by Joint Application
 Linear Joint
 Rotational Joint
 Dexterous Hand Joint
 Other Joints

By Region
 North America
 United States
 Canada
 Mexico

 Asia-Pacific
 China
 Japan
 South Korea
 Singapore
 India
 Taiwan
 Australia
 Other APAC

 Europe
 Germany
 Italy
 Spain
 France
 United Kingdom
 Other Europe
 Central and Latin America

 Middle East & Africa

Chapter Outline
Chapter 1: Introduces the scope of the report and the global market size (value, volume, and price). It also summarizes market dynamics and Recent Developments; identifies key drivers and restraints; outlines challenges and risks for manufacturers; reviews relevant industry policies and U.S. tariff implications.
Chapter 2: Provides a detailed analysis of the Humanoid Robot Bearings manufacturers’ competitive landscape—including pricing, sales and revenue shares, Recent Developments plans, and mergers and acquisitions (M&A).
Chapter 3: Analyzes market classification, presenting the size and growth potential of each segment to help readers identify blue-ocean opportunities.
Chapter 4: Analyzes market segmentation by Application, presenting the size and growth potential of each downstream segment to help readers identify blue-ocean opportunities.
Chapter 5: Presents Humanoid Robot Bearings sales and revenue at the regional level. It offers a quantitative assessment of market size and growth potential by region and summarizes market development, future prospects, addressable space, and country-level market size worldwide.
Chapter 6: Presents Humanoid Robot Bearings sales and revenue at the country level. It provides segmented data by Type and by Application for each country/region.
Chapter 7: Profiles key players, detailing the main companies’ product sales, revenue, pricing, gross margin, product portfolios, Recent Developments, etc.
Chapter 8: Analyzes the industry value chain, including upstream suppliers and downstream applications/customers.
Chapter 9: Research Findings and Conclusion.

ページTOPに戻る

Table of Contents

1 MARKET OVERVIEW 1
1.1 Humanoid Robot Bearings Product Introduction 1
1.2 Global Humanoid Robot Bearings Market Size Forecast 4
1.2.1 Global Humanoid Robot Bearings Sales Value (2021-2032) 5
1.2.2 Global Humanoid Robot Bearings Sales Volume (2021-2032) 6
1.2.3 Global Humanoid Robot Bearings Sales Price (2021-2032) 7
1.3 Humanoid Robot Bearings Market Trends & Drivers 8
1.3.1 Humanoid Robot Bearings Industry Trends 8
1.3.2 Humanoid Robot Bearings Market Drivers & Opportunities 9
1.3.3 Humanoid Robot Bearings Market Challenges 18
1.3.4 Humanoid Robot Bearings Market Restraints 28
1.4 Assumptions and Limitations 36
1.5 Study Objectives 37
1.6 Years Considered 38
2 COMPETITIVE ANALYSIS BY COMPANY 39
2.1 Global Humanoid Robot Bearings Players’ Revenue Ranking (2025) 39
2.2 Global Humanoid Robot Bearings Revenue by Company (2021-2026) 40
2.3 Global Humanoid Robot Bearings Sales Volume Ranking of Players (2025) 42
2.4 Global Humanoid Robot Bearings Sales Volume by Company (2021-2026) 42
2.5 Global Humanoid Robot Bearings Average Price by Company (2021-2026) 44
2.6 Key Manufacturers Humanoid Robot Bearings Manufacturing Base and Headquarters 45
2.7 Humanoid Robot Bearings Market Competitive Analysis 47
2.7.1 Humanoid Robot Bearings Market Concentration Rate (2021-2026) 47
2.7.2 Global 5 Largest Manufacturers by Humanoid Robot Bearings Revenue in 2025 48
2.7.3 Global Companies by Tier (Tier 1, Tier 2, Tier 3), based on Humanoid Robot Bearings revenue, 2025 48
2.8 Mergers & Acquisitions and Expansion 50
3 SEGMENTATION HUMANOID ROBOT BEARINGS MARKET CLASSIFICATION 54
3.1 Introduction by Type 54
3.1.1 Deep Groove Ball Bearing 54
3.1.2 Four Point Contact Bearings 56
3.1.3 Angular Contact Bearing 57
3.1.4 Crossed Roller Bearing 60
3.1.5 Flexible Bearings 61
3.1.6 Global Humanoid Robot Bearings Sales Value by Type 63
3.1.7 Global Humanoid Robot Bearings Sales Volume by Type 67
3.1.8 Global Humanoid Robot Bearings Average Price by Type (2021-2032) 69
3.2 Introduction by Humanoid Robot Structure 70
3.2.1 Neck 70
3.2.2 Waist 71
3.2.3 Arm 73
3.2.4 Leg 75
3.2.5 Dexterous Hand 76
3.2.6 Global Humanoid Robot Bearings Sales Value by Humanoid Robot Structure 78
3.2.7 Global Humanoid Robot Bearings Sales Volume by Humanoid Robot Structure 81
3.2.8 Global Humanoid Robot Bearings Average Price by Humanoid Robot Structure (2021-2032) 83
3.3 Introduction by Joint Application 84
3.3.1 Linear Joint 84
3.3.2 Rotational Joint 86
3.3.3 Dexterous Hand Joint 87
3.3.4 Global Humanoid Robot Bearings Sales Value by Joint Application 89
3.3.5 Global Humanoid Robot Bearings Sales Volume by Joint Application 92
3.3.6 Global Humanoid Robot Bearings Average Price by Joint Application (2021-2032) 94
4 SEGMENTATION BY APPLICATION 96
4.1 Introduction by Application 96
4.1.1 High-priced Humanoid Robots 96
4.1.2 Low-priced Humanoid Robots 98
4.2 Global Humanoid Robot Bearings Sales Value by Application 100
4.2.1 Global Humanoid Robot Bearings Sales Value by Application (2021 vs 2025 vs 2032) 101
4.2.2 Global Humanoid Robot Bearings Sales Value, by Application (2021-2032) 102
4.2.3 Global Humanoid Robot Bearings Sales Value, by Application (%), 2021-2032 102
4.3 Global Humanoid Robot Bearings Sales Volume by Application 103
4.3.1 Global Humanoid Robot Bearings Sales Volume by Application (2021 vs 2025 vs 2032) 103
4.3.2 Global Humanoid Robot Bearings Sales Volume, by Application (2021-2032) 104
4.3.3 Global Humanoid Robot Bearings Sales Volume, by Application (%), 2021-2032 105
4.4 Global Humanoid Robot Bearings Average Price by Application (2021-2032) 105
5 SEGMENTATION BY REGION 106
5.1 Global Humanoid Robot Bearings Sales Value by Region 106
5.1.1 Global Humanoid Robot Bearings Sales Value by Region: 2021 vs 2025 vs 2032 106
5.1.2 Global Humanoid Robot Bearings Sales Value by Region (2021-2026) 106
5.1.3 Global Humanoid Robot Bearings Sales Value by Region (2027-2032) 106
5.1.4 Global Humanoid Robot Bearings Sales Value by Region (%), 2021-2032 107
5.2 Global Humanoid Robot Bearings Sales Volume by Region 107
5.2.1 Global Humanoid Robot Bearings Sales Volume by Region: 2021 vs 2025 vs 2032 107
5.2.2 Global Humanoid Robot Bearings Sales Volume by Region (2021-2026) 108
5.2.3 Global Humanoid Robot Bearings Sales Volume by Region (2027-2032) 108
5.2.4 Global Humanoid Robot Bearings Sales Volume by Region (%), 2021-2032 108
5.3 Global Humanoid Robot Bearings Average Price by Region (2021-2032) 109
5.4 North America 110
5.4.1 North America Humanoid Robot Bearings Sales Value, 2021-2032 110
5.4.2 North America Humanoid Robot Bearings Sales Volume, 2021-2032 111
5.5 Europe 112
5.5.1 Europe Humanoid Robot Bearings Sales Value, 2021-2032 112
5.5.2 Europe Humanoid Robot Bearings Sales Volume, 2021-2032 113
5.6 Asia Pacific 114
5.6.1 Asia Pacific Humanoid Robot Bearings Sales Value, 2021-2032 114
5.6.2 Asia Pacific Humanoid Robot Bearings Sales Volume, 2021-2032 115
5.7 Latin America 116
5.7.1 Latin America Humanoid Robot Bearings Sales Value, 2021-2032 116
5.7.2 Latin America Humanoid Robot Bearings Sales Volume, 2021-2032 117
5.8 Middle East & Africa 118
5.8.1 Middle East & Africa Humanoid Robot Bearings Sales Value, 2021-2032 118
5.8.2 Middle East & Africa Humanoid Robot Bearings Sales Volume, 2021-2032 119
6 SEGMENTATION BY KEY COUNTRIES/REGIONS 120
6.1 United States 120
6.1.1 United States Humanoid Robot Bearings Sales Value, 2021-2032 120
6.1.2 United States Humanoid Robot Bearings Sales Volume, 2021-2032 121
6.2 Canada 122
6.2.1 Canada Humanoid Robot Bearings Sales Value, 2021-2032 122
6.2.2 Canada Humanoid Robot Bearings Sales Volume, 2021-2032 123
6.3 Mexico 124
6.3.1 Mexico Humanoid Robot Bearings Sales Value, 2021-2032 124
6.3.2 Mexico Humanoid Robot Bearings Sales Volume, 2021-2032 125
6.4 Germany 126
6.4.1 Germany Humanoid Robot Bearings Sales Value, 2021-2032 126
6.4.2 Germany Humanoid Robot Bearings Sales Volume, 2021-2032 127
6.5 Italy 128
6.5.1 Italy Humanoid Robot Bearings Sales Value, 2021-2032 128
6.5.2 Italy Humanoid Robot Bearings Sales Volume, 2021-2032 129
6.6 Spain 130
6.6.1 Spain Humanoid Robot Bearings Sales Value, 2021-2032 130
6.6.2 Spain Humanoid Robot Bearings Sales Volume, 2021-2032 131
6.7 France 132
6.7.1 France Humanoid Robot Bearings Sales Value, 2021-2032 132
6.7.2 France Humanoid Robot Bearings Sales Volume, 2021-2032 133
6.8 UK 134
6.8.1 UK Humanoid Robot Bearings Sales Value, 2021-2032 134
6.8.2 UK Humanoid Robot Bearings Sales Volume, 2021-2032 135
6.9 China 136
6.9.1 China Humanoid Robot Bearings Sales Value, 2021-2032 136
6.9.2 China Humanoid Robot Bearings Sales Volume, 2021-2032 137
6.10 Japan 138
6.10.1 Japan Humanoid Robot Bearings Sales Value, 2021-2032 138
6.10.2 Japan Humanoid Robot Bearings Sales Volume, 2021-2032 139
6.11 South Korea 140
6.11.1 South Korea Humanoid Robot Bearings Sales Value, 2021-2032 140
6.11.2 South Korea Humanoid Robot Bearings Sales Volume, 2021-2032 141
6.12 India 142
6.12.1 India Humanoid Robot Bearings Sales Value, 2021-2032 142
6.12.2 India Humanoid Robot Bearings Sales Volume, 2021-2032 143
7 COMPANY PROFILES 144
7.1 SKF (Sweden) 144
7.1.1 SKF Company Information 144
7.1.2 SKF Introduction and Business Overview 146
7.1.3 SKF Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 147
7.1.4 SKF Humanoid Robot Bearings Product Offerings 148
7.1.5 SKF Recent Developments 151
7.2 Nippon Thompson (IKO) (Japan) 151
7.2.1 Nippon Thompson (IKO) Company Information 151
7.2.2 Nippon Thompson (IKO) Introduction and Business Overview 153
7.2.3 Nippon Thompson (IKO) Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 155
7.2.4 Nippon Thompson (IKO) Humanoid Robot Bearings Product Offerings 155
7.2.5 Nippon Thompson (IKO) Recent Developments 165
7.3 Kitanihon Seiki (Japan) 166
7.3.1 Kitanihon Seiki Company Information 166
7.3.2 Kitanihon Seiki Introduction and Business Overview 168
7.3.3 Kitanihon Seiki Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 169
7.3.4 Kitanihon Seiki Humanoid Robot Bearings Product Offerings 169
7.3.5 Kitanihon Seiki Recent Developments 175
7.4 NSK (Japan) 176
7.4.1 NSK Company Information 176
7.4.2 NSK Introduction and Business Overview 178
7.4.3 NSK Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 179
7.4.4 NSK Humanoid Robot Bearings Product Offerings 179
7.4.5 NSK Recent Developments 188
7.5 Timken (USA) 188
7.5.1 Timken Company Information 188
7.5.2 Timken Introduction and Business Overview 190
7.5.3 Timken Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 191
7.5.4 Timken Humanoid Robot Bearings Product Offerings 191
7.5.5 Timken Recent Developments 199
7.6 Nachi-Fujikoshi (Japan) 200
7.6.1 Nachi-Fujikoshi Company Information 200
7.6.2 Nachi-Fujikoshi Introduction and Business Overview 202
7.6.3 Nachi-Fujikoshi Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 203
7.6.4 Nachi-Fujikoshi Humanoid Robot Bearings Product Offerings 203
7.7 THK (Japan) 212
7.7.1 THK Company Information 212
7.7.2 THK Introduction and Business Overview 214
7.7.3 THK Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 215
7.7.4 THK Humanoid Robot Bearings Product Offerings 216
7.7.5 THK Recent Developments 225
7.8 Schaeffler (Germany) 226
7.8.1 Schaeffler Company Information 226
7.8.2 Schaeffler Introduction and Business Overview 228
7.8.3 Schaeffler Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 229
7.8.4 Schaeffler Humanoid Robot Bearings Product Offerings 229
7.8.5 Schaeffler Recent Developments 234
7.9 JTEKT (Japan) 235
7.9.1 JTEKT Company Information 235
7.9.2 JTEKT Introduction and Business Overview 237
7.9.3 JTEKT Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 238
7.9.4 JTEKT Humanoid Robot Bearings Product Offerings 238
7.9.5 JTEKT Recent Developments 242
7.10 MinebeaMitsumi (Japan) 243
7.10.1 MinebeaMitsumi Company Information 243
7.10.2 MinebeaMitsumi Introduction and Business Overview 245
7.10.3 MinebeaMitsumi Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 246
7.10.4 MinebeaMitsumi Humanoid Robot Bearings Product Offerings 246
7.10.5 MinebeaMitsumi Recent Developments 252
7.11 Luoyang Hongyuan (HONB) (China) 252
7.11.1 Luoyang Hongyuan (HONB) Company Information 252
7.11.2 Luoyang Hongyuan (HONB) Introduction and Business Overview 254
7.11.3 Luoyang Hongyuan (HONB) Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 255
7.11.4 Luoyang Hongyuan (HONB) Humanoid Robot Bearings Product Offerings 256
7.11.5 Luoyang Hongyuan (HONB) Recent Developments 263
7.12 CCTY (China) 264
7.12.1 CCTY Company Information 264
7.12.2 CCTY Introduction and Business Overview 265
7.12.3 CCTY Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 266
7.12.4 CCTY Humanoid Robot Bearings Product Offerings 267
7.12.5 CCTY Recent Developments 275
7.13 HIWIN (Taiwan, China) 277
7.13.1 HIWIN Company Information 277
7.13.2 HIWIN Introduction and Business Overview 279
7.13.3 HIWIN Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 280
7.13.4 HIWIN Humanoid Robot Bearings Product Offerings 280
7.13.5 HIWIN Recent Developments 285
7.14 LS Bearings (China) 286
7.14.1 LS Bearings Company Information 286
7.14.2 LS Bearings Introduction and Business Overview 288
7.14.3 LS Bearings Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 290
7.14.4 LS Bearings Humanoid Robot Bearings Product Offerings 290
7.14.5 LS Bearings Recent Developments 294
7.15 Wanxiang Qianchao (China) 296
7.15.1 Wanxiang Qianchao Company Information 296
7.15.2 Wanxiang Qianchao Introduction and Business Overview 297
7.15.3 Wanxiang Qianchao Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 299
7.15.4 Wanxiang Qianchao Humanoid Robot Bearings Product Offerings 299
7.15.5 Wanxiang Qianchao Recent Developments 302
7.16 Tiejin Technology (STT) (China) 303
7.16.1 Tiejin Technology (STT) Company Information 303
7.16.2 Tiejin Technology (STT) Introduction and Business Overview 305
7.16.3 Tiejin Technology (STT) Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 306
7.16.4 Tiejin Technology (STT) Humanoid Robot Bearings Product Offerings 307
7.16.5 Tiejin Technology (STT) Recent Developments 312
7.17 Changsheng Bearings (CSB) (China) 312
7.17.1 Changsheng Bearings (CSB) Company Information 312
7.17.2 Changsheng Bearings (CSB) Introduction and Business Overview 314
7.17.3 Changsheng Bearings (CSB) Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 316
7.17.4 Changsheng Bearings (CSB) Humanoid Robot Bearings Product Offerings 316
7.17.5 Changsheng Bearings (CSB) Recent Developments 319
7.18 C&U (China) 320
7.18.1 C&U Company Information 320
7.18.2 C&U Introduction and Business Overview 322
7.18.3 C&U Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 323
7.18.4 C&U Humanoid Robot Bearings Product Offerings 323
7.18.5 C&U Recent Developments 328
7.19 XCC Group (China) 328
7.19.1 XCC Group Company Information 328
7.19.2 XCC Group Introduction and Business Overview 330
7.19.3 XCC Group Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 332
7.19.4 XCC Group Humanoid Robot Bearings Product Offerings 332
7.19.5 XCC Group Recent Developments 335
7.20 Changzhou NRB (China) 336
7.20.1 Changzhou NRB Company Information 336
7.20.2 Changzhou NRB Introduction and Business Overview 338
7.20.3 Changzhou NRB Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 339
7.20.4 Changzhou NRB Humanoid Robot Bearings Product Offerings 340
7.20.5 Changzhou NRB Recent Developments 345
7.21 Ningbo Shilong (RCL) (China) 346
7.21.1 Ningbo Shilong (RCL) Company Information 346
7.21.2 Ningbo Shilong (RCL) Introduction and Business Overview 348
7.21.3 Ningbo Shilong (RCL) Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 349
7.21.4 Ningbo Shilong (RCL) Humanoid Robot Bearings Product Offerings 349
7.21.5 Ningbo Shilong (RCL) Recent Developments 356
7.22 Luoyang Xinkai (China) 356
7.22.1 Luoyang Xinkai Company Information 356
7.22.2 Luoyang Xinkai Introduction and Business Overview 358
7.22.3 Luoyang Xinkai Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 359
7.22.4 Luoyang Xinkai Humanoid Robot Bearings Product Offerings 359
7.22.5 Luoyang Xinkai Recent Developments 362
7.23 Haina Renhe (China) 362
7.23.1 Haina Renhe Company Information 362
7.23.2 Haina Renhe Introduction and Business Overview 364
7.23.3 Haina Renhe Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 365
7.23.4 Haina Renhe Humanoid Robot Bearings Product Offerings 366
7.23.5 Haina Renhe Recent Developments 371
7.24 Cixing Group (China) 371
7.24.1 Cixing Group Company Information 371
7.24.2 Cixing Group Introduction and Business Overview 373
7.24.3 Cixing Group Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 374
7.24.4 Cixing Group Humanoid Robot Bearings Product Offerings 374
7.24.5 Cixing Group Recent Developments 381
7.25 Zhejiang Qisheng (China) 381
7.25.1 Zhejiang Qisheng Company Information 381
7.25.2 Zhejiang Qisheng Introduction and Business Overview 383
7.25.3 Zhejiang Qisheng Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 384
7.25.4 Zhejiang Qisheng Humanoid Robot Bearings Product Offerings 384
7.25.5 Zhejiang Qisheng Recent Developments 386
7.26 Shandong Bote (China) 387
7.26.1 Shandong Bote Company Information 387
7.26.2 Shandong Bote Introduction and Business Overview 388
7.26.3 Shandong Bote Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 389
7.26.4 Shandong Bote Humanoid Robot Bearings Product Offerings 390
7.26.5 Shandong Bote Recent Developments 393
7.27 Shanghai SXD (China) 394
7.27.1 Shanghai SXD Company Information 394
7.27.2 Shanghai SXD Introduction and Business Overview 395
7.27.3 Shanghai SXD Humanoid Robot Bearings Sales, Revenue, Price and Gross Margin (2021-2026) 396
7.27.4 Shanghai SXD Humanoid Robot Bearings Product Offerings 397
7.27.5 Shanghai SXD Recent Developments 399
8 INDUSTRY CHAIN ANALYSIS 401
8.1 Humanoid Robot Bearings Industrial Chain 401
8.2 Humanoid Robot Bearings Upstream Analysis 406
8.2.1 Key Raw Materials 406
8.2.2 Key Suppliers of Raw Materials 410
8.2.3 Manufacturing Cost Structure 415
8.3 Midstream Analysis 421
8.4 Downstream Analysis (Customer Analysis) 425
8.5 Sales Model and Sales Channels 432
8.5.1 Humanoid Robot Bearings Sales Model 432
8.5.2 Sales Channels 436
8.5.3 Humanoid Robot Bearings Distributors 439
9 RESEARCH FINDINGS AND CONCLUSION 442
10 APPENDIX 447
10.1 Research Methodology 447
10.1.1 Methodology/Research Approach 447
10.1.2 Data Source 450
10.2 Author Details 453
10.3 Disclaimer 453